AIRBORNE 10 /.400″ by Messi & Paoloni
€3.90
% Regular price: €4.32 (9.72% saved) previously €4.32
Available, delivery time: 2-5 days
Product information "AIRBORNE 10 /.400″ by Messi & Paoloni"
The AIRBORNE 10 /.400″ by Messi & Paoloni is a state-of-the-art, high-end coaxial cable designed for radio amateurs, professional radio applications, and demanding RF installations. Engineered for maximum performance with minimal losses, this 10.3 mm coaxial cable sets benchmarks in its class—especially for outdoor use and long-term operation.
Extremely Low Attenuation – Measurably Better
One of its standout features is the exceptionally low signal attenuation: only 19 dB / 100 m at 2400 MHz, measured on a 10.3 mm coaxial cable. This results in higher field strength, improved reception quality, and greater efficiency—particularly at high frequencies and over long cable runs.
Designed for Direct Burial & Outdoor Use
The AIRBORNE 10 is completely waterproof and specifically designed for direct burial in the ground. Its rugged, tear-resistant PE outer jacket reliably protects against moisture, UV radiation, temperature fluctuations, and mechanical stress—ideal for permanent outdoor installations without additional protective conduits.
Lightweight, Robust, and Superior Shielding
Despite its 10.3 mm diameter, the AIRBORNE 10 is approximately 45% lighter than comparable 10 mm coaxial cables, making installation and routing significantly easier. The ultra-dense copper braid consisting of 192 strands provides excellent shielding effectiveness, substantially reducing background noise and interference—an obvious advantage for receive-critical locations and DX operation.
Cable Selection Tip
Coaxial cables with a solid center conductor—such as the AIRBORNE 10—are ideal for fixed installations, as they exhibit lower losses than cables with stranded conductors. 👉 For very tight bend radii or rotor-mounted antennas, we recommend the ULTRAFLEX 10, which is specifically designed for maximum flexibility.
Typical Applications
-
Amateur radio (HF, VHF, UHF, SHF)
-
Outdoor antenna systems
-
Repeater and base stations
-
Direct-buried antenna feeder lines
-
Professional radio and data links
Technical Specifications – AIRBORNE 10 /.400″
-
Characteristic impedance: 50 Ω
-
Outer diameter: 10.3 mm (.400″)
-
Center conductor: solid conductor
-
Dielectric: foamed
-
Shielding: ultra-dense copper braid with 192 strands
-
Shielding attenuation: > 105 dB
-
Capacitance: approx. 74 pF/m
-
Velocity factor: approx. 87%
-
Minimum bend radius: approx. 65 mm
-
Weight: approx. 7.1 kg / 100 m
-
Temperature range: −45 °C to +70 °C
-
Outer jacket: PE, UV-resistant, waterproof
Attenuation Values (per 100 m cable length)
-
1.8 MHz: approx. 0.6 dB
-
14 MHz: approx. 1.3 dB
-
50 MHz: approx. 2.4 dB
-
100 MHz: approx. 3.5 dB
-
144 MHz: approx. 4.2 dB
-
400 MHz: approx. 7.2 dB
-
1296 MHz: approx. 13.6 dB
-
2400 MHz: approx. 19.2 dB
-
6000 MHz: approx. 32.8 dB
-
12 GHz: approx. 50.2 dB
Maximum Power Rating (CW at 40 °C)
-
3.5 MHz: approx. 8,471 W
-
7 MHz: approx. 6,667 W
-
14 MHz: approx. 5,180 W
-
28 MHz: approx. 3,731 W
-
50 MHz: approx. 2,939 W
-
144 MHz: approx. 1,710 W
-
400 MHz: approx. 992 W
-
1000 MHz: approx. 610 W
-
2400 MHz: approx. 375 W
Informationen gemäß Art. 19 GPSR
Hersteller: Messi&Paoloni
Herstellername: Messi & Paoloni Srl
Handelsname: Messi & Paoloni
Adresse: Via Giovanni Conti 1 - 60131 ANCONA, Italy
E-Mail: web@messi.it
Webseite: https://messi.it/
Verantwortliche Person:
Name: Messi & Paoloni Srl
Adresse: Via Giovanni Conti 1 - 60131 ANCONA, Italy
E-Mail: web@messi.it
Webseite: https://messi.it/
Passendes Artikel
The Messi & Paoloni MP-CO.UHF.7M-S-EVO is a UHF Male (PL259) solder enhanced connector for 7.3mm / .287" cables. Genuine Messi & Paoloni enhanced solder connector UHF Male (PL259) 2-Pack Compression design with double seal to ensure better protection against infiltration of water, humidity and condensation Easy installation and welding instructions included in the package (no braid soldering needed) Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses The UHF Evolution can be used up to 6000 MHz, a well made PL259 is barely acceptable up to 2000 MHz Model MP-CO.UHF.7M-S-EVO Product dimensions: 0.82 x 1.81 in. (2.1cm x 4.6cm) Wrench size: 0.63 in (16mm) For ULTRAFLEX 7 /.287'' cable Note: The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable.
PL-connector UHF-Special 10 This high-quality PL-259 connector is suitable for the coax cable types: HyperFlex 10, H 2010, H 2010 FRNC = Calorix 10, Ecoflex 10, Ultraflex 10,H2000 Flex, H 1000, LMR 400, MMR 400, Neoflex 10. Type: UHF connector special Design: Connector Connection: Soldering Cable inlet Ø10,3 mm Material: Housing: nickel-plated brass. Dielectric: Teflon (PTFE) We use these connectors for the prefabricated Hyperflex 10 coax cables. The assembly instructions can be downloaded here or under the "Media" tab.
Messi & Paoloni N-Stecker für 10mm Koaxkabel Dieser hochwertige N-Stecker von Messi & Paoloni ist für die Koaxkabeltypen: Ultraflex 10, Hyperflex 10, Airborn 10, Ecoflex10, RG-213, H2000 geeignet. Der Löt-N-Stecker kommt mit Dichtungsring, PTFE-Dielektrikum und vergoldetem Mittelstift zu Ihnen. Die zwei diamagnetische Mittelstifte sind lötbar und lassen sich auf viele 10,3 mm-Kabel montieren. Die Mittelstifte sind mit verschieden großen Lötöffnungen versehen. Die zwei mitgelieferten PTFE-Scheiben ermöglichen eine einfache Installation des Steckers. Die PTFE-Scheiben und eine ringförmige Verdickung auf dem Mittelkontakt verhindern, dass das Kabel bei mechanischer Belastung aus der festgelegten Position gezogen werden kann. Kompressionsdesign mit doppelter Dichtung, die einen besseren Schutz gegen das Eindringen von Wasser, Feuchtigkeit und Kondenswasser gewährleistet. Einfache Installation und Lötanleitung im Paket enthalten (kein Lötgeflecht erforderlich). Drastische Unterdrückung des Hintergrundrauschens, Verbesserung der Schirmdämpfung und der Einfügungsverluste. Die Oberflächen sind mit einer speziellen Legierung namens Smart3-Alloy® behandelt: Sie ist korrosionsbeständig und antiallergisch. Der neu konzipierte Stift verhindert einen Zinnüberschuss und die daraus resultierende Erwärmung, die das Dielektrikum beschädigt und zu einer unkontrollierbaren Veränderung der elektrischen Eigenschaften Ihres Kabels führt. Messi & Paoloni Code: CO.N.10M-S Informationen gemäß Art. 19 GPSRHersteller: Messi&PaoloniHerstellername: Messi & Paoloni SrlHandelsname: Messi & PaoloniAdresse: Via Giovanni Conti 1 - 60131 ANCONA, ItalyE-Mail: web@messi.itWebseite: https://messi.it/ Verantwortliche Person:Name: Messi & Paoloni SrlAdresse: Via Giovanni Conti 1 - 60131 ANCONA, ItalyE-Mail: web@messi.itWebseite: https://messi.it/
Special scissors for cables specifically designed by Messi & Paoloni for ensuring a great accuracy in the cutting of each cable layers. This cable scissor cuts cables 12mm like: RG58, H 155, Hyperflex 5, Ultraflex 7, Hyperflex 10, RG213 and many more. We use these cable scissors ourselves and cut all cables with it. It lays very good in the hand and you just have in the best control and feel the different layers of the coaxial cable and can cut exactly the desired part of the cable. This cable scissor from Messi and Paoloni is our recommendation to our customers