If you don't get an e-mail with your access data, please make sure that you have already registered with us. As soon as you are registered, you can login with your e-mail address and your password.
In case you still have problems logging in, please turn to us by e-mail: email@example.com
ELAD-SP1 is a speaker born to cooperate with the FDM-DUO and the FDM-DUOr. It can be used also if it is not powered, in this case the input is connected directly to the loudspeaker. It is small, in fact it measures 110x115x130mm (height, width and depth).
In the front panel, on the bottom right, there is a button that allows to change the amplification of the speaker, a LED will activate to show the current mode:
1. the first one is the flat one and it produce the sounds without equalization
2. applies a filter a bandfilter (100 Hz ÷ 3 KHz)
3. applies a voice enhanced filter
NOTE: If the SP-1 is not powered the input is connected directly to the loudspeaker
Electrical specifications :
• Power supply : 12÷15 Vdc (13.8Vdc typical),
• THD for 10W RMS audio output on 4 ohms : <1%,
• THD for 15W RMS audio output on 4 ohms : typical 3%,
• Max audio input level on 50 ohms for 15W RMS output: 1.4V RMS.