Boni-Whip Active Antenna
€170.00
Available, delivery time: 2-5 days
Product information "Boni-Whip Active Antenna"
Boni-Whip Active Antenna 20kHz - 300MHz
- Wide frequency range 20 kHz - 300 MHz
- Small dimensions
- Ideal for traveling, at home or DX-Camps
The BONI-WHIP active antenna replaces the very successful Mini-Whip antenna. Despite its size (only approx. 17 cm long), it renders excellent reception results on longwave, mediumwave and shortwave and additionally for VHF up to 300 MHz. We developed this antenna ourselves and it is built here in Germany, so it really is “Made in Germany” by Bonito. The antenna offers a lot of improvements and better values than the original Mini-Whip. In our newsroom you can see a benchmark test between the Boni-Whip vs. the Mini.Whip: http://newsroom.bonito.net
Even on very low frequencies the Boni-Whip produces very good reception results. It can be used beginning with 20 kHz and is a good choice for listeners who are interested in low frequencies.
We also thought about radio listeners who are interested in high frequencies and extended the range to 300 MHz. Even with only a little effort you can achieve fantastic reception results; and because of its small size, the antenna can be erected inconspicuously.
The active antenna circuitry is cased in a weather resistant box. The voltage supply is delivered by the antenna cable and the included power supply module.
Boni-Whip: As flexible as you
Because of its interchangeable radiating elements (Whips) the Boni-Whip can be used with different elements for experiments. The antenna can thus be adjusted to the surrounding environment or a special reception area.
Customer comment
I have performed extensive outdoor tests on the Boni-Whip at various locations in Germany, Austria, and USA; and even I am amazed that we have produced an antenna with such small size, mobility and excellent performance/price ratio. You will get a noticeably better antenna for almost the same price as the original Mini-Whip.
Boni-Whip: Quality made in Germany
The electronics of the Boni-Whip are manufactured in Germany by an ISO9000-certified assembly company in industrial quality and assembled by us in the Bonito QTH.
Technical data Boni-Whip
- Frequency range: 20 kHz -300 MHz
- Voltage supply: 12V-15V
- Gain: 3dB
- Upper Frequency Limit: (-1db): 300 MHz
- IP3: +32.5 dBm
- IP2: +55 dBm
What's in the Box:
- Boni-Whip active Antenna
- Junction box
- Whip / Radiator
- 5,5mm/2,1mm barrel DC power connector
What else do i need?
- The Boni-Whip shortwave antenna is delivered without a coaxial cable, as everyone needs a different length. We offer you the right coaxial cables such as the H155 or the even better shielded Hyperflex 5 in different lengths. You need two coax cables: A coax cable between the Boni-Whip and the feeder with BNC plugs. In addition, another coaxial cable, from the feed switch (BNC plug) to your receiver.
- A stabilized 12V DC transformer power supply (no switching power supply!) Which can deliver approx. 150mA with a 5.5 / 2.1mm barrel connector is required for the power supply.
- The mast bracket, which is available in 28mm and 40mm, is useful for mounting on the mast etc.
- The OVP1000 surge arrester can also be useful for current weather events.
- To protect the BNC connector against weather influences, we offer a self-vulcanizing adhesive tape called NittoTape.
- If you want a little more amplification, you can also use the longer and flexible radiator, which brings approx 3 dB more level.
Please note:
The offered coaxial cables are custom-made and cannot be exchanged at a later date!
Total length of the cable: cable cut +/- 3% + connector
| Anschluss der Versorgungsspannung: | 5,5 / 2,1mm barrel connector |
|---|---|
| Connector socket: | BNC |
| Einsatzbereich: | Outdoor |
| Einspeiseweiche: | Standard |
| IP2: | > +50 dBm |
| IP3: | > +30 dBm |
| Impedanz: | 50 Ohms |
| Made in Germany: | Yes |
| Max. Frequenzbereich: | 20 kHz - 300 MHz |
| Stromverbrauch: | Typ: 65mAh |
| Stromversorgung: | 12 - 15 Volt |
| Typ: | E-Field |
| UKW-Bandstop-Filter: | No |
| Verstärkung: | +3dB |
Accessory Items
Flexible radiator M6 40cm long and flexible radiator with M6 stainless steel thread. Fits all MegActiv MA305 and Boni-Whip with M6 thread (Boni-Whip 2017 or later). This new radiator brings around 3dB more gain.
7,5 Volt plug AC Adapter with additional noise filter Low noise unstabilizied 7,5 Volt max. 150mA plug power supply adapter with transformer (no switching power supply). 230 Volts only! This power supply is linear regulated and is no switching power supply. A "real" transformer is installed. Good for active antenna applications such as MegaLoop, MegActiv, MegaDipol and GigActiv. With additional noise filter Interference suppression for network-related interference at the output: 150kHz - 30MHz:> 25dB In the medium wave range even> 40dB Technical data Input: 230V AC / 50Hz / 3,6 W Output: 7,5 V DC / max. 150 mA (10,5 Volt idle) Dimensions without connectors: 75 x 55 x 60mm Weight: 100 grams Euro Plug Made in Germany
This V4A mounting bracket fits for the Boni-Whip, MegActiv, GigActiv and the MegaLoop.
Langlebiges Wetterschutzgehäuse für aktive AntennenDieses Wetterschutzgehäuse wurde speziell zum dauerhaften Schutz aktiver NTi Monopol-Antennen wie MegActiv MA305, GigActiv und Boni-Whip entwickelt. Das robuste, weitgehend UV-beständige Gehäuse aus Polycarbonat, schützt die Antennenelektronik zuverlässig vor Regen, Schmutz und mechanischen Einflüssen. Der transparente Deckel ermöglicht eine einfache Sichtprüfung der Antennenköpfe, ohne das Gehäuse öffnen zu müssen. Durch das bewährte Gehäuse-im-Gehäuse-Prinzip wird die empfindliche Elektronik zusätzlich isoliert und geschützt. Ein zusätzlicher externer Erdungsanschluss an der antennenseitigen Masseverbindung der BNC-Anschlussbuchse gewährleistet eine sichere und fachgerechte Erdung.Zur Vermeidung von Kondenswasser ist das Wetterschutzgehäuse nach unten offen bzw. belüftet, wodurch Feuchtigkeit zuverlässig abgeführt wird. Sämtliche Befestigungselemente aus Edelstahl garantieren Korrosionsbeständigkeit und eine hohe mechanische Stabilität – selbst bei langfristigem Einsatz im Freien.Ideal für langlebige und wartungsarme Antenneninstallationen im Outdoor-Bereich.Einfache und sichere MastbefestigungDas Wetterschutzgehäuse ist bereits für die optional erhältliche Masthalteplatte (Art.-Nr. 0127) vorbereitet und ermöglicht so eine einfache und sichere Mastmontage. Bereits vorhandene Masthalterungen können selbstverständlich weiterverwendet werden. Lieferumfang1x vormontiertes Wetterschutzgehäuse mit Trägerplatte incl. Erdanschlussverbinder zur BNC-Buchse1x Strahleranschluss-Schraube 25mm lang & Karosseriescheibe (M5 oder M6) Montageanleitung Eine Montageanleitung finden Sie hier: Montageanleitung PDFInformationen gemäß Art. 19 GPSR Adresse des Herstellers: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net Adresse der verantwortlichen Person: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net
CCMC50 Common Mode Noise Filter Noise filters are nothing new and are often used for transmitting purposes. They are used to prevent unwanted radiation via the coax shielding. It is less known that they can also suppress unwanted radiation when receiving signals, especially when an active antenna is used. However, in this case, the situation is reversed: en route to the antenna, unwanted interferences from electric home appliances can be effectively eliminated. This Coaxial Common Mode Choke (CCMC50) has been especially optimized for maximum common mode noise rejection of >30dB wide band in the frequency range of 500kHz – 50MHz. With slight limitations a much wider frequency range is covered. This is possible by using a cascaded system of ferrite cores with various frequency dependent material properties, combined with high quality PTFE coaxial cable. We recommend to connect the CCMC50 as closely as possible to the receiver. For the highest demands we still offer the proven Common Mode Noise Filter CCMC30, which is specially optimized for maximum Common mode noise rejection of guaranteed> 30dB broadband in the reception range from 150kHz - 30MHz. With the CCMC50 a reasonably priced version is now available with the following minor limitations against the CCMC30: Common mode noise rejection guaranteed> 30dB, broadband in the reception range from 500kHz - 50MHz instead of starting at 150kHz. Starting with the medium wave over short wave up to the 6m amateur radio band, which should be sufficient for most applications. Not suitable for outdoor use because it is not splashproof. With regard to efficient noise suppression, the CCMC50 is not very much different from the galvanic isolator GI1000. However, the CCMC50 performes down to lowest frequencies including DC voltage, in contrast to the GI1000, which blocks DC voltages and very low frequencies. The CCMC50 can thus be connected directly to the coax cable which passes the supply voltage or the control signals to the active antenna. A series connection of the GI1000 directly connected to the receiver followed by the CCMC50 right behind the power inserter may result in an even better performance. Technical Data Optimal frequency range: 500 kHz – 50 MHz Common Mode Wave suppression: >30 dB: 500 kHz -50MHz (>20 dB: 100kHz-70MHz) Insertion loss: <1 dB max. 500MHz, < 1.5dB bis max 1.5GHz Size: 127x65x43mm (160mm with BNC connectors) Connectors: 2x BNC 50Ohm Weight: 160g Made in Germany Absolutely not for transmitting purposes!
Similar Items
MegActiv MA305FT Wide Band Active Antenna Wide frequency range 9kHz – 300MHz Small dimensions Dual Power Supply: 5,5V – 15V Selectable FM band stop filter with low pass function Ideal for traveling, at home or DX-Camps IP3:>typ. +30dBm / IP2:>typ. +50dBm Enlarged and flexible 200mm radiating element The new MegActiv MA305FT is an evolution of the popular MegActiv MA305. In addition to small improvements in electronics, the new MegActiv MA305FT has been equipped with a switchable FM band-stop filter. Thus, disturbing radiation from the FM band between 88 and 108 MHz can be easily minimized The new MegActiv MA305FT close the gap between the Boni-Whip and the GigActiv GA3005 E-Field Antennas. This low noise active antenna, which is produced according to the highest standards, covers the frequency range between 9kHz and 300MHz. With a radiating element of only 22 cm / 8,66 inch it can be erected inconspicuously. It can be powered with 5-15 V DC (max.10mA) and alternatively with the supplied Power unit CPI 1500DP via USB. Flexible FM-band stop filter Based on the well proven Megactiv platform, an additional low pass filter and a FM-band stop filter were integrated which can be activated or deactivated with a jumper. In case of FM-interferences, the FM bandstop filter can be activated with a jumper and so FM signals between 88 MHz and 108 MHz will be attenuated by 25 – 40 dB. Flexible power supply The MegActiv MA305FT can be operated by two different kinds of power sources. It can be powered either by a conventional plug power supply (5,5 / 2,1mm round plug) or via USB with a optional Cable. Powering via USB has the advantage that no external power supply is needed and that the antenna can be operated autonomously and noise-free with a separate USB PowerBank. The supply voltage range is 5 - 15V DC (10mA max) and thus the antenna is also well suited for portable use. You want to test the MegActiv MA305FT live on air? If you would like to test the MegActiv MA305FT active antenna live, you can now conveniently do this over the Internet with a KIWI SDR. Just click on this Link and you can browse the whole band from 10kHz to 30MHz. The linked KIWI-SDR with a MegActiv MA305FT is located in Bonn (DL0DTM Clubstation Deutsche Telekom) and can handle up to 4 users at a time. Features Integrated double surge protection of the active components: Coarse protection by gas discharge tubes with 60V firing voltage with max. pulse leakage current 1kA (8/20µs) with additional integrated ESD fine protection of max. 2kV. Standard delivery with Power unit CPI1500DP (external power supply and USB-operation possible) IP3:>typ. +30dBm IP2:>typ. +50dBm Integrated double overvoltage protection of the active antenna part Integrated double surge protection of the active components: Coarse protection by gas discharge tubes with 60V firing voltage with max. pulse leakage current 1kA (8/20µs) with additional integrated ESD fine protection of max. 2kV. Fernando from Fenu-Radio.ch did the first comparison Test in Mai 2015 and released this test on his Page in German: www.fenu-radio.ch. Quote from the review by FenuRadio: (translated) "The NTi MegActiv is a small receiving antenna with excellent reception performance. The construction proved to be unproblematic, similar to the Boni-Whip. From VLF up on the FM band, the MegActiv receives very well despite their small size. When properly setup it provides a nearly unbeatable signal / noise ratio!" Whats in the box? MegActiv MA305FT Whip / Radiator Junction box CPI1500UNI Made in Germany Please note! The offered coax cables are custom-made and therefore not returnable / refundable.
GigActiv GA3005 Extreme Wideband Active Antenna Frequency range : 9 kHz - 3 GHz Power Supply: 5,5V - 12V Gain: + 3dB Upper Frequency Limit (-1db): 3000 MHz IP3: > +30 dBm typ. IP2: > +50 dBm typ. Where space is at a premium or you live in an area where an antenna is considered an undesirable element in neighborhood, the new GigActiv GA3005 is the ideal solution for the avid listener with a wide band receiver. The low noise GigActiv 3005 Extreme Wideband Active Antenna by NTi covers the whole frequency range from 9 kHz – 3 GHz. The antenna radiator measures only 10 cm (approx 4 inches) and so the unit can be mounted unobtrusively. The antenna requires a supply voltage of 5 –12V DC (max. 120mA) fed through the coax cable via the standard supplied DC interface CPI3000DP. It can also be powered via USB with slightly reduced performance. This is perfect for portable use in combination with a PC, which powers the antenna or the antenna can be powered autonomously and noise-free with a separate USB power bank. For shortwave and above 200MHz an IP3 of typically > +30dBm is achieved. USB-powering possibleLarge supply voltage range of 5-12V. It can be powered either by a conventional plug power supply (5,5 / 2,1mm round plug) or via USB with a optional Cable. Autonomously and noise- free via a separate USB Power Bank as well. Whats in the Box?- GigActiv GA3005- Radiator- Junctionbox CPI3000UNI Dimesions incl Radiator:185 x 57 x 35mm (7.28 x 2,24 x 1,38 inch) Made in Germany