Ultraflex 10 Competition Koaxialkabel

Messi & Paoloni Ultraflex 10 Low-Loss Coaxial Cable – Assembled The Ultraflex 10 Competition coaxial cable is professionally assembled by us and can be supplied with connector types of your choice. All connectors are expertly installed in-house and subsequently tested. The available cable lengths are based on our many years of experience and the most commonly requested sizes. Of course, we are happy to manufacture custom lengths or alternative connector configurations according to your requirements. Simply get in touch with us—we’ll be glad to advise you. The Innovation of Flexibility in 10 mm Coaxial Cables from Messi & Paoloni The Ultraflex 10 Competition low-loss coaxial cable from Messi & Paoloni is suitable for frequencies of up to 8 GHz. This RF cable is highly flexible and designed for use in HF, VHF, UHF, and even SHF applications. Ultraflex 10 is manufactured with a 7-strand center conductor, which enables an unprecedented level of flexibility for a cable with a 10.3 mm diameter. High Performance for Almost Every RF Application Ultraflex 10 is a coaxial cable suitable for most radio and RF applications. It is extremely flexible, features low attenuation, and offers excellent protection against interference thanks to its double shielding (foil and tight copper braid) with a shielding effectiveness of 105 dB. A carefully manufactured braid produced using 24 carriers surrounds the plastic- and copper-coated aluminum foil. The optical coverage is 71%, ensuring reliable shielding performance. Key Features Very low attenuation – ideal for long cable runs Extremely flexible – perfect for rotor antennas, tight installations, and mobile applications Excellent shielding – reliable protection against RF interference and common-mode currents Connector-friendly – compatible with common connectors (N, PL, SMA, BNC for 10.3 mm cables) Made in Italy – highest manufacturing quality by Messi & Paoloni Compared to RG58U The significant differences compared to RG58U are described in detail in a separate article, including many real-world examples. (Link to article) Ultraflex 10 Competition – Features Very flexible Suitable for rotor operation 7-strand center conductor Modern design suitable for frequencies up to 8 GHz UV-resistant Compatible with many antenna connectors commonly used with RG-213 Technical Specifications Impedance: 50 ohms Outer diameter: 10.3 mm Center conductor: pure copper (99.99%), 7 × 1.0 mm stranded, Ø 2.9 mm ± 0.15 Dielectric: gas-injected foamed polyethylene (PE), Ø 7.3 mm Shielding: 1st layer: copper-PE foil (100% coverage) 2nd layer: bare copper braid (144 strands, 71% coverage) Total shielding effectiveness: >105 dB Outer jacket: UV-resistant PVC Minimum bend radius: 40 mm Operating temperature: −40 °C to +70 °C Weight: approx. 13 kg per 100 m Attenuation Values (per 100 m cable length) @ 50 MHz: 2.7 dB @ 100 MHz: 3.9 dB @ 200 MHz: 5.7 dB @ 400 MHz: 8.3 dB @ 800 MHz: 12.1 dB @ 1000 MHz: 13.8 dB @ 2400 MHz: 23.7 dB Maximum Power Rating (CW at 40 °C) 2437 W @ 28 MHz 1049 W @ 144 MHz 587 W @ 430 MHz Informationen gemäß Art. 19 GPSRHersteller: Messi&PaoloniHerstellername: Messi & Paoloni SrlHandelsname: Messi & PaoloniAdresse: Via Giovanni Conti 1 - 60131 ANCONA, ItalyE-Mail: web@messi.itWebseite: https://messi.it/Verantwortliche Person:Name: Messi & Paoloni SrlAdresse: Via Giovanni Conti 1 - 60131 ANCONA, ItalyE-Mail: web@messi.itWebseite: https://messi.it/

The Messi & Paoloni MP-CO.UHF.7M-S-EVO is a UHF Male (PL259) solder enhanced connector for 7.3mm / .287" cables. Genuine Messi & Paoloni enhanced solder connector UHF Male (PL259) 2-Pack Compression design with double seal to ensure better protection against infiltration of water, humidity and condensation Easy installation and welding instructions included in the package (no braid soldering needed) Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses The UHF Evolution can be used up to 6000 MHz, a well made PL259 is barely acceptable up to 2000 MHz Model MP-CO.UHF.7M-S-EVO Product dimensions: 0.82 x 1.81 in. (2.1cm x 4.6cm) Wrench size: 0.63 in (16mm) For ULTRAFLEX 7 /.287'' cable Note: The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable.

Messi & Paoloni N-Stecker für 10mm Koaxkabel Dieser hochwertige N-Stecker von Messi & Paoloni ist für die Koaxkabeltypen: Ultraflex 10, Hyperflex 10, Airborn 10, Ecoflex10, RG-213, H2000 geeignet. Der Löt-N-Stecker kommt mit Dichtungsring, PTFE-Dielektrikum und vergoldetem Mittelstift zu Ihnen. Die zwei diamagnetische Mittelstifte sind lötbar und lassen sich auf viele 10,3 mm-Kabel montieren. Die Mittelstifte sind mit verschieden großen Lötöffnungen versehen. Die zwei mitgelieferten PTFE-Scheiben ermöglichen eine einfache Installation des Steckers. Die PTFE-Scheiben und eine ringförmige Verdickung auf dem Mittelkontakt verhindern, dass das Kabel bei mechanischer Belastung aus der festgelegten Position gezogen werden kann. Kompressionsdesign mit doppelter Dichtung, die einen besseren Schutz gegen das Eindringen von Wasser, Feuchtigkeit und Kondenswasser gewährleistet. Einfache Installation und Lötanleitung im Paket enthalten (kein Lötgeflecht erforderlich). Drastische Unterdrückung des Hintergrundrauschens, Verbesserung der Schirmdämpfung und der Einfügungsverluste. Die Oberflächen sind mit einer speziellen Legierung namens Smart3-Alloy® behandelt: Sie ist korrosionsbeständig und antiallergisch. Der neu konzipierte Stift verhindert einen Zinnüberschuss und die daraus resultierende Erwärmung, die das Dielektrikum beschädigt und zu einer unkontrollierbaren Veränderung der elektrischen Eigenschaften Ihres Kabels führt. Messi & Paoloni Code: CO.N.10M-S   Informationen gemäß Art. 19 GPSRHersteller: Messi&PaoloniHerstellername: Messi & Paoloni SrlHandelsname: Messi & PaoloniAdresse: Via Giovanni Conti 1 - 60131 ANCONA, ItalyE-Mail: web@messi.itWebseite: https://messi.it/ Verantwortliche Person:Name: Messi & Paoloni SrlAdresse: Via Giovanni Conti 1 - 60131 ANCONA, ItalyE-Mail: web@messi.itWebseite: https://messi.it/

PL-connector UHF-Special 10 This high-quality PL-259 connector is suitable for the coax cable types:  HyperFlex 10, H 2010, H 2010 FRNC = Calorix 10, Ecoflex 10, Ultraflex 10,H2000 Flex, H 1000, LMR 400, MMR 400, Neoflex 10.  Type: UHF connector special Design: Connector Connection: Soldering Cable inlet Ø10,3 mm Material: Housing: nickel-plated brass. Dielectric: Teflon (PTFE) We use these connectors for the prefabricated Hyperflex 10 coax cables. The assembly instructions can be downloaded here or under the "Media" tab.

N-Connector special 10 mm This high-quality N connector is suitable for the coax cable types:  HyperFlex 10, H 2010, H 2010 FRNC = Calorix 10, Ecoflex 10, Ultraflex 10,H2000 Flex, H 1000, LMR 400, MMR 400, Neoflex 10.  The center pins are provided with two different holes (solder contacts) The center pin with the bigger solder contact has the right dimension for Ultraflex 10, H 2010, Calorix 10, HyperFlex 10,  Ecoflex 10, RG 213 LOW LOSS and similar cables. The center pin with the smaller solder contact has the right dimension for H 2000 Flex, H 1000, Aircom Premium Type: N connector special Design: Connector Connection: Soldering Cable inlet Ø10,3 mm The assembly instructions can be downloaded here or under the "Media" tab.