POTA-FLEX 7 Koaxkabel

POTA-FLEX 6 is the latest coaxial cable type from the Italian company Messi & Paoloni. This coaxial cable has been specially developed and manufactured for the harsh conditions of outdoor applications such as POTA, SOTA, DX expeditions, etc. For good visibility, it has a yellow, reflective and tread-resistant PE jacket. The shielding of the POTA-Flex 6 consists of 3 layers: 2 x braid of copper-clad aluminum, each with 120 wires. Underneath this is a copper foil with a PE layer surrounding the dielectric. This makes the cable very light, very robust and achieves ideal HF shielding at a very low weight of just 5.4 kg for 100 meters. The manufacturer has carefully tested this cable to evaluate the performance after 100 windings and 100 unwindings and found only minimal deviations. These results are especially guaranteed in combination with the POTA-SPEED, which ensures that the minimum bending radius is always maintained, as well as for the quick and practical handling of the windings.

Messi & Paoloni N-connector for 7mm coaxial cable This high-quality N-connector from Messi & Paoloni is suitable for coaxial cable types: Ultraflex 7, PotaFlex 7, H 2007, HIGHFLEXX 7, Aircell 7 and similar. The solder N connector comes with a sealing ring, PTFE dielectric and gold-plated center pin. The two PTFE washers supplied make it easy to install the connector. The PTFE washers and a ring-shaped thickening on the center contact prevent the cable from being pulled out of its fixed position under mechanical stress.Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.Easy installation and welding instructions included in the package (no braid soldering needed).Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.The surfaces are treated with a special alloy called Smart3-Alloy®: it is corrosion-resistant and hypoallergenic.The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable (differently from standard PL259 which is exposed to strong thermical stress). Product dimensions: 2,1cm x 4,0cm Wrench size: 16mm (0,63 in) *Connectors are sold individually, image is for illustrative purpose. Code: CO.N.7M-S

PL-connector PL7 for Ultraflex 7 This high-quality PL-259 connector is suitable for the coax cable types H 2007, H 2007 FRNC, HIGHFLEXX 7, Aircell 7 and of course Ultraflex 7. It is equipped as standard with a ground connection sleeve. Type: UHF connector specialDesign: ConnectorConnection: SolderingCable inlet Ø7.3 mm We use these connectors for the prefabricated Ultraflex 7 coax cables. The assembly instructions can be downloaded here

Special scissors for cables specifically designed by Messi & Paoloni for ensuring a great accuracy in the cutting of each cable layers.  This cable scissor cuts cables 12mm like: RG58, H 155, Hyperflex 5, Ultraflex 7, Hyperflex 10, RG213 and many more. We use these cable scissors ourselves and cut all cables with it. It lays very good in the hand and you just have in the best control and feel the different layers of the coaxial cable and can cut exactly the desired part of the cable. This cable scissor from Messi and Paoloni is our recommendation to our customers