H155 Low-Loss Coax Cable pre-fabricated

Product information "H155 Low-Loss Coax Cable pre-fabricated"

H155 Low-Loss coax cable pre-fabricated

Bonito pre-fabricated H 155 coaxial cable with connectors upon your request. The connectors are either soldered (PL) or crimped (BNC and N) and tested.

The available lengths are based on most customers needs. Other lengths are available and can be delivered according to your request. Should you need other lengths or plugs, please, contact us; we love to help you.

The H 155 cable is a doubly shielded low loss coax cable with a 5.4mm diameter. It is extremely flexible with a very low dampening factor and excellent shielding.

We have discribed the major differences between H155 and RG58U with many real examples in a Bonito Newsroom article: "Why even good antennas need good Coax cable": Read more

Technical data:
Colour: grey
UV: H 155 is UV-resistant
Impedance: 50 ± 2 Ohm
Inner conductor: 19 x 0,28 mm
Insulation: Gas inj. PE 3,9 mm
outer conductor:
1. Alufoil 0,008-0,03 x 18 mm AL-PET-AL 2 mm overlapping
2. copperbraid coverage 80% 16 x 8 x 0,1 mm; 4,5 mm
Outside cover: PVC, 5,4 mm,
Velocity factor: 0,81
Capacity: 82 ± 2 pF/m
Screening till 1 GHz: > 85 dB
Bending radius (min): 35 mm
Temperature: from -30 --- +80°C / -16° F ---- 176°F
Resistance inside: 1,5 Ohm / 100 m
Loop resistance: 3,2 Ohm / 100 m
Copper: 22 kg / km
Strength: 100 N

Accessory Items

Solder ''BNC'' female connector 5-6mm

Solder ''BNC'' female connector 5-6mm Our 50 Ohm soldering BNC socket with sealing ring, PTFE dielectric, gold-plated center pin. Available for cables with 5-6mm (H155, Hyperflex 5, Aircell 5). Our BNC cable socket is suitable for all cables of the RG 58 dimension as well as for all cables of the H 155 / Hyperflex 5 series. This BNC socket is provided with 2 ground connection sleeves and 2 center pins. The sleeve with the larger receptacle is designed for H 155 and similar cables. The same applies to the center contact with the larger solder hole. The center contacts are diamagnetic.

€4.90*

Paloran 200 passive Loop Antenna

Coax cable HF214UF 2x BNC: Without coax cable HF214UF | Mast mounting: no Mast mounting | Weather protection case: No Weather protection case

Ultra-wideband frequency range from 9kHz to 200MHz Different radiator shapes and sizes can be used Can be used indoors and outdoors Additional ground connection (M5) at the case High quality processing; splash-proof housing, all screw connections are made in stainless steel Small packaging = low shipping costs The PALORAN 200 is a high-quality broadband passive loop antenna for a Frequency range of 9kHz to 200MHz. The Paloran 200 antenna is a good alternative when you have sufficient room to install it and if you want low-interference reception at the same time. In the near field area (i.e. less than approx three wavelengths), loop antennas mainly react to the magnetic (H-field) component of the electromagnetic field. Therefore, the reception of mainly electric (E-field) disturbances is effectively suppressed, which is especially noticeable in the lower frequency range (VFL/longwave/medium wave and lower shortwave bands because of less radio interference. Due its merely passive operating principle, the Paloran 200 needs more space than other active loop antennas. The PALORAN’s loop has a circumference of about 15m. The advantage is that the antenna produces no intermodulation or other internally generated disturbing components. It does not need a power supply, either. Recommendation Near the sea or in case of possible contact with salt water we strongly recommend the use of our weather protection case. Scope of delivery: Paloran200 15 Meters (49ft) PVC coated stainless steel wire (V4A) 2x Isolators Manual

From €199.00*

Details

JG-LPF74 TRX Tiefpassfilter 120Watt (neues Modell 2022) ideal für den IC7300

JG-LPF74 LOW PASS FILTER 0-74MHZ - 120W

It’s great to reach a clean signal free of FM stations, broadcasts or whatever on modern equipments as ICOM IC7300. This filter is fully designed and manufactured from JG Hitechnology in Italy. Elliptical filter with 7 cells, low pass 0-74MHz. Brass cells separator manufactured especially for this filter. Each cell shielding allows great performances as the possibility to transmit up to 74 MHz and to have at the same time a strong attenuation at 88 MHz of 40 dB(at 98 MHz of 60dB, see graph below). It also allows to cancel FM residuals through all the HF spectrum up to 74 MHz. Usage range : Low pass filter with female/female SO239 connector. You can connect the filter directly between radio and antenna and use it in power with 120 watt. It’s ideal to break down FM residuals on HF (50 MHz and 70 MHz) frequencies for last generation radios like ICOM 7300 and similar. Low drop in reception up to 74 MHz. Uniqueness : Brass cells separator has been designed especially for this filter. 40dB attenuation at 88 MHz, >60 dB attenuation at 98 MHz. You can transmit up to 74 MHz with 100 W. Connectors: SO239 female - SO239 female or N female - N fale Materials: Cylinder shape structure anticorodal (6000 alloy) aluminum made. Red colored anodization. Laser fiber engraving. Technical features : 40dB attenuation at 88 MHz and 50 dB at 98 MHz Connectors SO239 Ceramic capacitors HI-Q RF 250V

€89.99* €99.99* (10% saved)