Schützt, was dir wichtig ist. Exklusiv bei Bonito. Der neue ICOM IC-7300MK2 ist mehr als nur ein Funkgerät – er ist ein Versprechen. Ein Upgrade, das dich viele Jahre begleiten wird. Ein Gerät, das du mit Stolz auf deinem Shack-Tisch stehen hast. Ein Gerät das man nicht einfach besitzt – man genießt es. Und genau deshalb verdient es Schutz, der diesem Anspruch gerecht wird. Ein DX-Cover mit Seele — liebevoll bestickt in England Jedes DX-Cover wird von Tracie Cooke in England mit viel Sorgfalt und Liebe bestickt. Die Stickerei sieht nicht nur edel aus, sie verleiht dem Cover auch dieses besondere Gefühl von Wertigkeit, das man bei Massenware vergeblich sucht. Wenn man es in der Hand hält, merkt man sofort: Das ist Qualität. Das ist Stil. Das ist eine Aufwertung für den neuen MK2. Warum dieses DX-Cover perfekt für deinen IC-7300MK2 ist Perfekte Passform – speziell für den IC-7300MK2. Berücksichtigt auch die neuen Schnittstellen wie USB-C, HDMI und LAN. Außen robust, innen sanft. Premium-Kunstleder außen, weiches Filz-Innenfutter zum Schutz des Displays. Kabel dran lassen? Kein Problem. Dank offener Rückseite bleiben USB-C, Antennenstecker, LAN oder Tuneranschlüsse dauerhaft eingesteckt.Edle Stickerei statt billiger Print. Tracies präzise Stickarbeit macht jedes Cover zu einem optischen Highlight. Sauber, geschützt, langlebig. Das Cover hält Staub, Licht und Kratzer vom Gerät fern – perfekt für den täglichen Shack-Betrieb. Exklusiv in Deutschland und Teilen Europas nur bei Bonito. Informationen gemäß Art. 19 GPSR Hersteller: Prism Embroidery, 12 Marcus Road, Dartford, Kent, DA1 3JX, U.K. E-Mail: Tracie at PrismEmbroidery.co.uk Verantwortliche Person: Prism Embroidery, 12 Marcus Road, Dartford, Kent, DA1 3JX, U.K. E-Mail: Tracie at PrismEmbroidery.co.uk

Unfortunately we cannot be on air every day!So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. DX Covers Icom IC-7760 radio dust cover comes in 5 variants.Head Unit only with Icom IC-7760 embroidered on the front panel with no 60th logo Head Unit only with Icom IC-7760 and the 60th Anniversary edition embroidered on the front panel The Rf Deck with the Icom Logo embroidered on the front panel Head Unit only with IC-7760 embroidered on the front panel no 60th logo + The Rf Deck with the Icom Logo embroidered on the front panel Head Unit only with Icom IC-7760 and the 60th Anniversary edition embroidered on the front panel + The Rf Deck with the Icom Logo embroidered on the front panel Premium quality that immediately catches the eyeEach DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory.The DX covers fit perfectly on your device.You will notice the fantastic quality and loving workmanship as soon as you unpack.

Protective, Stylish, and Made with Passion Imagine this: you're out on a field day – your beloved Yaesu FTX-1 is set up and ready to connect you to the world. But dust, scratches, or accidental bumps can take their toll on your valuable radio. That’s where the DX-Cover for the Yaesu FTX-1 comes in – your reliable guardian and a statement of style. Crafted from high-quality leatherette with a soft felt lining, this cover combines durable protection with a sleek, professional appearance. Designed with care and attention to detail, it keeps your radio safe while adding a touch of elegance to your setup. Made in England, this cover represents craftsmanship and durability you can rely on. Why This DX-Cover Stands Out Perfect Fit for Both Versions Field Model: Designed to fully cover the head unit with the battery pack attached (Dimensions: 100 × 225 × 95 mm – Depth × Width × Height). Optima Model: Smart design with an open back panel, allowing cables to remain connected without obstruction. Premium Embroidery The Yaesu logo and model name are beautifully embroidered, giving your radio a distinctive, professional look. Durable & Elegant The tough leatherette exterior protects against dust, scratches, and daily wear, while the soft felt lining gently cushions your valuable equipment. Stylish for Any Shack or Field Adventure Whether at home, in your shack, or out in the field, this cover is practical, protective, and visually stunning. More Than Just Protection – A Statement This DX-Cover is more than a simple dust cover. It’s a declaration of how much you value your equipment and your passion for amateur radio. Whether you’re at home or on a POTA or SOTA expedition, it ensures your Yaesu FTX-1 is always ready for action – and always looking its best. Keep your radio safe from dust and scratches while showing your commitment to quality and style. Informationen gemäß Art. 19 GPSR Hersteller: Prism Embroidery, 12 Marcus Road, Dartford, Kent, DA1 3JX, U.K. E-Mail: Tracie at PrismEmbroidery.co.uk Verantwortliche Person: Prism Embroidery, 12 Marcus Road, Dartford, Kent, DA1 3JX, U.K. E-Mail: Tracie at PrismEmbroidery.co.uk

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day!So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eyeEach DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day!So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eyeEach DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day!So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eyeEach DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day!So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eyeEach DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day!So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eyeEach DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day!So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eyeEach DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day!So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eyeEach DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Leider können wir nicht jeden Tag radiohören. Damit Ihre Empfänger, Funkgeräte, Endstufen, Lautsprecher etc. nicht einstauben, gibt es diese wunderschönen und praktischen Staubschutzhauben von DX Covers. Die Staubschutzhauben sind aus weichem Kunstleder gefertigt und passgenau für die unterschiedlichen Geräte angefertigt. Das verwendete Kunstleder ist glatt, weich und pflegeleicht. Auf der Innenseite ist zudem weicher Filz eingenäht, um empfindliche Displays zu schützen.  Rundum geschützt Das DX-Cover für den Tecsun S2200X ist wie eine Kapuze gefertigt und umschließt den Empfänger vollständig. Es ist nur nach unten hin offen. Somit ist Ihr S2200X rundherum geschützt.Premiumqualität die sofort ins Auge fällt Jede Staubschutzhaube der Marke DX Cover wird in England aus hochwertigem Kunstleder gefertigt und anschließend mit dem Firmenlogo und der Modellnummer bestickt. Anschließend wird das DX Cover mit weichem Filz ausgekleidet. Dieser sorgt dafür, dass Ihre Geräte so gut aussehen wie am Tag ihrer Herstellung. Die DX Covers passen perfekt auf Ihr Gerät. Bereits beim Auspacken werden Sie die fantastische Qualität und die liebevolle Verarbeitung bemerken.  Ihr Gerät ist nicht dabei? Wir haben nicht alle verfügbaren DX-Cover im Shop. Kontaktieren Sie uns einfach. Wir helfen gern. DX Covers Staubschutzhaube haben die Genehmigung zur Verwendung der Herstellerlogos von: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE und Yaesu.  -----------------------------------------------------------------------------------------------  Informationen gemäß Art. 19 GPSR Adresse des Herstellers: Prism Embroidery 12 Marcus Road Dartford, Kent DA1 3JX, U.K. Tracie @ PrismEmbroidery.co.uk Adresse der verantwortlichen Person: Adresse des Herstellers: Prism Embroidery 12 Marcus Road Dartford, Kent DA1 3JX, U.K. Tracie @ PrismEmbroidery.co.uk