Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Schützt, was dir wichtig ist. Exklusiv bei Bonito. Der neue ICOM IC-7300MK2 ist mehr als nur ein Funkgerät – er ist ein Versprechen. Ein Upgrade, das dich viele Jahre begleiten wird. Ein Gerät, das du mit Stolz auf deinem Shack-Tisch stehen hast. Ein Gerät das man nicht einfach besitzt – man genießt es. Und genau deshalb verdient es Schutz, der diesem Anspruch gerecht wird. Ein DX-Cover mit Seele — liebevoll bestickt in England Jedes DX-Cover wird von Tracie Cooke in England mit viel Sorgfalt und Liebe bestickt. Die Stickerei sieht nicht nur edel aus, sie verleiht dem Cover auch dieses besondere Gefühl von Wertigkeit, das man bei Massenware vergeblich sucht. Wenn man es in der Hand hält, merkt man sofort: Das ist Qualität. Das ist Stil. Das ist eine Aufwertung für den neuen MK2. Warum dieses DX-Cover perfekt für deinen IC-7300MK2 ist Perfekte Passform – speziell für den IC-7300MK2. Berücksichtigt auch die neuen Schnittstellen wie USB-C, HDMI und LAN. Außen robust, innen sanft. Premium-Kunstleder außen, weiches Filz-Innenfutter zum Schutz des Displays. Kabel dran lassen? Kein Problem. Dank offener Rückseite bleiben USB-C, Antennenstecker, LAN oder Tuneranschlüsse dauerhaft eingesteckt.Edle Stickerei statt billiger Print. Tracies präzise Stickarbeit macht jedes Cover zu einem optischen Highlight. Sauber, geschützt, langlebig. Das Cover hält Staub, Licht und Kratzer vom Gerät fern – perfekt für den täglichen Shack-Betrieb. Exklusiv in Deutschland und Teilen Europas nur bei Bonito. Informationen gemäß Art. 19 GPSR Hersteller: Prism Embroidery, 12 Marcus Road, Dartford, Kent, DA1 3JX, U.K. E-Mail: Tracie at PrismEmbroidery.co.uk Verantwortliche Person: Prism Embroidery, 12 Marcus Road, Dartford, Kent, DA1 3JX, U.K. E-Mail: Tracie at PrismEmbroidery.co.uk

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day!So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. DX Covers Icom IC-7760 radio dust cover comes in 5 variants.Head Unit only with Icom IC-7760 embroidered on the front panel with no 60th logo Head Unit only with Icom IC-7760 and the 60th Anniversary edition embroidered on the front panel The Rf Deck with the Icom Logo embroidered on the front panel Head Unit only with IC-7760 embroidered on the front panel no 60th logo + The Rf Deck with the Icom Logo embroidered on the front panel Head Unit only with Icom IC-7760 and the 60th Anniversary edition embroidered on the front panel + The Rf Deck with the Icom Logo embroidered on the front panel Premium quality that immediately catches the eyeEach DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory.The DX covers fit perfectly on your device.You will notice the fantastic quality and loving workmanship as soon as you unpack.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.

Unfortunately we cannot be on air every day! So that your radios, power amplifiers, loudspeakers etc. do not get dusty, there are now beautiful and practical dust covers from DX Covers. The DX Covers dust covers are made of soft and high quality leatherette and specifically tailored to fit the different devices. They also offer a light level of mechanical protection from small items coming into contact with your equipment.It leaves enough space for the connectors and cables. The high quality leatherette used is smooth, soft and easy to care for. Soft felt is also sewn into the inside to protect the sensitive displays. The back is open, so there is enough space for antenna cables, accessory connections or control cables. Premium quality that immediately catches the eye Each DX Cover dust cover is lovingly made in England from high quality leatherette and then embroidered with the company logo and the model number. Once this is completed, the cover is then lined in a soft felt which helps to keep your equipment looking as good as the day it came out of the factory. The DX covers fit perfectly on your device. You will notice the fantastic quality and loving workmanship as soon as you unpack. DX Covers dust covers are approved to use the manufacturer logos of: Acom, Ameritron, Elad, Elecraft, Expert Electronics, Icom, Kenwood, MFJ, OM Power, Palstar, RF-KIT, SPE and Yaesu.