TECSUN S-8800e

Der KiwiSDR wird leider ohne passendes Netzteil angeboten. Der KiwiSDR braucht 5Volt und etwa 500mA zum Starten. Wir hatten mir Anfangs mit einem 5Volt Steckernetzteil experimentiert, aber außer viel Störungen nicht viel empfangen können. Durch viel Testen und den Tipp eines netten Kunden, konnten wir ein Netzteil auftreiben, das a.) günstig ist und b.) recht wenig Eigenstörungen verursacht. Wir bieten nun das Ganze als Bundle mit USB auf Hohlsteckerkabel an. Das mitgelieferte Kabel ist 1m lang. Input: 230V AC / 50Hz / 3,8 Watt Output: 5V DC / max. 2100 mA Abmessungen ohne Stecker: 55 x 75 x 60mm  Gewicht: 100 Gramm

Adapter cable BNC to 3.5mm jack plug Hyperflex 5 Adapter cable BNC-jack made of Hyperflex 5 by Messi&Paoloni low loss coaxial cable to connect external antennas with BNC-plug to the antenna input of a World Band Receiver (3,5mm jack) Most word band receivers have an external antenna connection which is a 3.5mm jack socket. If you want to use an external antenna with BNC connection, you need an adapter. Since the standard adapter jack on PL, then further from PL to BNC, are much too large and bulky for the radios, the jack socket on the receiver quickly turns off and contact difficulties occur after a short time. In the worst case, the jack must be replaced. With this adapter cable the jack socket of the World Band Receiver is relieved and in most cases you can connect the external antenna / the bias tee directly.  The available lengths are based on most customers needs. Other lengths are available and can be delivered according to your request.  Should you need other lengths or plugs, please, contact us; we are happy to help. Informationen about the cable The Hyperflex 5 cable is a doubly shielded low loss coax cable with a 5.4mm diameter. It is extremely flexible with a very low dampening factor and excellent shielding.  We have discribed the major differences between Hyperflex 5 and RG58U with many real examples in a Bonito Newsroom article: "Why even good antennas need good Coax cable": Read more Please note! These cables are custom-made and therefore are not returnable / refundable.

USB-Netzteil für Tecsun Weltempfänger mit USB Ladeanschluss Kompaktes Netzteil zum aufladen der Tecsun Weltempfänger mit USB-Anschluss wie PL-880, PL-990x, PL-368, S-8800 und 8800e etc . Ermöglicht schnelles Laden direkt an der Steckdose. Eingang: 100…240 V~ Ausgang: 5 V-, 1 A Leistung: max. 5 W Anschluss: USB 2.0-Buchse (Typ A)

Original Li-Ion-Akku 2600mAh Tecsun LI-ION Akku-Rundzelle Original TECSUN Akku "blue power" vom Typ: 18650, mit 2600mAh Kapazität. Gefertigt unter Einsatz neuester Produktionstechniken und integrierter Sicherheitsschaltung. Die blaue Powerzelle für extra langen Einsatz! Für folgende Empfänger bestens geeignet und freigegeben: Weltempfänger TECSUN PL880 (1x erforderlich) Weltempfänger TECSUN PL990 (1x erforderlich) Weltempfänger TECSUN H-501x (1x erforderlich) Weltempfänger TESCUN S-8800 (2x erforderlich) Akku-Eigenschaften: kein Memory Effekt praktisch keine Selbstentladung geringer Innenwiderstand (Viel Leistung innerhalb kurzer Zeit möglich) Bis 600 Ladezyklen möglich (danach ca.30% Restkapazität) Geschützt gegen Überladung & Tiefentladung sowie zu hohe Temperaturen, was den Akku dauerhaft schädigen könnte und im Extremfall sogar gefährlich werden kann. Selbstverständlich ist auch dieser LiIon-Akku für den Einsatz im Tecsun Weltempfänger perfekt geeignet und freigegeben. Er ermöglicht im Vergleich zum Original-Akku (2000mAh) eine über 40% längere Einsatzzeit. Mit dem original-Akku von TECSUN  bleibt auch die 2-Jährige Garantie für die TECSUN Empfänger vollständig erhalten. Unser Tipp: Viele Anbieter haben diesen Typ Akku mit hohen Kapazitäten im Angebot, aber die Angaben sind oft weit weg von jeder Realität, deshalb gibt es auch enorme Preisunterschiede. Hohe Qualität und Sicherheit hat immer auch Ihren Preis, bei uns können Sie sich auf die genannten Angaben verlassen und erhalten frische Original-Zellen. Große Leistung zu kleinem Preis, damit ist der 2600 mAh starke Akku ist unser Preis/Leistungssieger.

New improved NES10-2MK4 with increased audio power and the latest bhi DSP noise cancelling technology New The bhi NES10-2MK4 amplified DSP noise cancelling speaker removes noise and interference from noisy speech signals enabling you to have a much more enjoyable listening experience.  The speaker is compact and easy to use and incorporates the latest high performance bhi DSP noise cancelling technology. The three position switch on the top of the speaker controls the following functions; “Off” (audio bypass), “On” (amplified audio) and “DSP” (noise cancelling on). The speaker has a quality 5W audio amplifier with DSP noise cancelling from 8 to 40dB over 8 user selectable levels, and tone reduction up to 65dB.  The NES10-2MK4 requires 10 to 18V DC (500mA). The speaker has an integral 2m audio lead terminated with a 3.5mm mono jack plug and comes with a sturdy metal mounting bracket.  There is a 3.5mm mono headphone socket on the side and this can also drive an external loudspeaker. The NES10-2MK4 speaker is supplied with a rotary filter select knob, two fixing screws, 4 self-adhesive rubber feet, 1 x 1030-FPL fused DC power lead and user manual.   The NES10-2MK4 DSP noise cancelling speaker is suitable for use in a wide range of radio communication applications across all radio frequencies, and is particularly effective for improving the voice quality in amateur radio and shortwave listening. The speaker can be used in a base station base station environment or used mobile in a vehicle.   The power “On” LED illuminates red when power is applied and changes to green when the noise cancellation is active. The overload LED lights if the audio input is overloading the speaker.  The output level control allows you to adjust the audio output to suit your setup. Features Fully adaptive DSP noise cancelling 8 to 40dB Up to 65dB tone reduction Function switch for audio bypass, audio on and DSP on 8 user selectable filter levels 5 Watts audio (adjustable) LED indication of power on, filter on and audio overload 3.5mm mono headphone socket (will also drive another speaker) Compact robust speaker housing Easy to install with adjustable metal mounting bracket 10 to 18V DC operation Testimonial "I own a JRC NRD545 DSP receiver which as always produced audio that I found really harsh to listen to on single sideband. On Saturday at the GQRP convention I purchased  NES10-2 speaker on a recommendation from a friend. I have owned and still own many audio filters of one sort or another but your product was a revelation. The NES10-2 does exactly what it says on the tin and I can now enjoy listening to my receiver." Best regards  Ken   “On 40, 20, & 15 mtrs, I had constant 57/8 noise, I connected the NES10-2 to my rig and the improvement was truly remarkable” Terry G0VTI “An excellent easy-to-use plug-in accessory that can significantly improve your receivers audio performance and readability” RadCom review Dec 2002

Boni-Whip Active Antenna 20kHz - 300MHz Wide frequency range 20 kHz - 300 MHz Small dimensions  Ideal for traveling, at home or DX-Camps The BONI-WHIP active antenna replaces the very successful Mini-Whip antenna. Despite its size (only approx. 17 cm long), it renders excellent reception results on longwave, mediumwave and shortwave and additionally for VHF up to 300 MHz. We developed this antenna ourselves and it is built here in Germany, so it really is “Made in Germany” by Bonito. The antenna offers a lot of improvements and better values than the original Mini-Whip. In our newsroom you can see a benchmark test between the Boni-Whip vs. the Mini.Whip: http://newsroom.bonito.net Even on very low frequencies the Boni-Whip produces very good reception results. It can be used beginning with 20 kHz and is a good choice for listeners who are interested in low frequencies. We also thought about radio listeners who are interested in high frequencies and extended the range to 300 MHz. Even with only a little effort you can achieve fantastic reception results; and because of its small size, the antenna can be erected inconspicuously.  The active antenna circuitry is cased in a weather resistant box. The voltage supply is delivered by the antenna cable and the included power supply module.  Boni-Whip: As flexible as you Because of its interchangeable radiating elements (Whips) the Boni-Whip can be used with different elements for experiments. The antenna can thus be adjusted to the surrounding environment or a special reception area. Customer comment I have performed extensive outdoor tests on the Boni-Whip at various locations in Germany, Austria, and USA; and even I am amazed that we have produced an antenna with such small size, mobility and excellent performance/price ratio. You will get a noticeably better antenna for almost the same price as the original Mini-Whip. Boni-Whip: Quality made in Germany The electronics of the Boni-Whip are manufactured in Germany by an ISO9000-certified assembly company in industrial quality and assembled by us in the Bonito QTH. Technical data Boni-Whip Frequency range: 20 kHz -300 MHz Voltage supply: 12V-15V Gain: 3dB Upper Frequency Limit: (-1db): 300 MHz IP3: +32.5 dBm IP2: +55 dBm What's in the Box:  Boni-Whip active Antenna  Junction box  Whip / Radiator 5,5mm/2,1mm barrel DC power connector What else do i need? The Boni-Whip shortwave antenna is delivered without a coaxial cable, as everyone needs a different length. We offer you the right coaxial cables such as the H155 or the even better shielded Hyperflex 5 in different lengths. You need two coax cables: A coax cable between the Boni-Whip and the feeder with BNC plugs. In addition, another coaxial cable, from the feed switch (BNC plug) to your receiver. A stabilized 12V DC transformer power supply (no switching power supply!) Which can deliver approx. 150mA with a 5.5 / 2.1mm barrel connector is required for the power supply. The mast bracket, which is available in 28mm and 40mm, is useful for mounting on the mast etc. The OVP1000 surge arrester can also be useful for current weather events. To protect the BNC connector against weather influences, we offer a self-vulcanizing adhesive tape called NittoTape. If you want a little more amplification, you can also use the longer and flexible radiator, which brings approx 3 dB more level. Please note: The offered coaxial cables are custom-made and cannot be exchanged at a later date!Total length of the cable: cable cut +/- 3% + connector