Go to homepage
€0.00*

Mini Endfed Multiband Antenne DIY-Bausatz für 10-20-40 Meter ohne Spule

Skip image gallery
Mini Endfed Multiband Antenne 1:49 - Bonito
Mini Endfed Multiband Antenne Teile - Bonito
Mini Endfed Multiband Antenne - Bonito
Mini Endfed Multiband Antenna - Bonito
Mini Endfed Multiband Antenne 1:49 - Bonito
Mini Endfed Multiband Antenne Teile - Bonito
Mini Endfed Multiband Antenne - Bonito
Mini Endfed Multiband Antenna - Bonito

€41.50*

% €46.00* (9.78% saved)
Content: 1 Stück

Prices incl. VAT plus shipping costs

Available, delivery time: 2-5 days

Antenna wire
Product number: 0656

Product information "Mini Endfed Multiband Antenne DIY-Bausatz für 10-20-40 Meter ohne Spule"

Mini Endfed antenna kit, max 100 watts for 10-15-20-40 meters approx. 20 meters long, without extension coil The Mini Endfed is a small End Fed antenna solution for portable use, when travelling, POTA, QRP, SOTA (Summit on the Air) or DX expeditions etc. The IP65 protected housing made of polycarbonate with a size of only 64x58x35 mm can be easily stowed in a pocket or backpack, but is also robust enough for stationary mounting. The weight is around 400-500 grams, depending on the length of the antenna. 

If you attach the antenna to the top of a telescopic mast and slide out the mast segments, you can be on air within a few minutes! To attach the housing of the 1:49 transformer to a mast, the same bracket can be used as for our active antennas.

This Mini Endfed kit is supplied with an antenna wire of your choice:

Standard antenna wire: This antenna wire consists of 1.0 mm2 fine stranded copper conductor with black PVC insulation. The total diameter is approx. 2 mm. Ideal for experiments or vacation antennas. As the core is only made of copper, this stranded wire will become slightly longer and therefore thinner over time. The tensile strength of this stranded antenna wire is limited. 

Copper/Kevlar stranded antenna wire This stranded antenna wire is specially manufactured for antennas. The stranded wire consists of a Kevlar core with approx. 1.1 mm2 tinned and fine-stranded copper conductors. 1x 0.4 mm Kevlar and 24x 0.25 mm copper. The sheathing is made of black UV-resistant PE. The total diameter is approx. 2.5 mm. The tensile strength is approx. 50 kg. You receive a strong, flexible and relatively light antenna strand. 

These complete Mini End Fed Multiband kits are designed for 100 Watt PEP Phone and are available in these versions: 

  • 10-15-20-40 meters approx. 20 meters long, without extension coil 
  • 10-20-40 meters, approx. 12 meters long, with 34uH extension coil 
  • 10-15-20-40-80 meters, approx. 21 meters long with 110uH extension coil

The kit contains the following components: 

approx. 20.45 meters of antenna wire
1x stainless steel cable clamp
1x end insulator
1x cable lug 5mm 1:49 Mini 

Impedance transformer: 

IP65 housing 64x58x35mm polycarbonate
Toroidal core FT140-43
Enameled copper wire GR2 quality 1.00 mm
100 pF capacitor 2kV
1x BNC flange socket
2x M2.5 screws 8/10mm
2x M2.5 nut
2x M2,5 washer
1x cable lug 3mm
3x M5 cable lug
2x stainless steel M5 screw 20mm
2x stainless steel M5 wing nut
2x stainless steel M5 collar nut
2x stainless steel M5 toothed washer
2x stainless steel M5 screw 20mm
2x stainless steel M5 wing nut
2x stainless steel M5 collar nut
2x stainless steel M5 toothed washer
1x ring M4
1x toothed washer M4
1x nut M4
1x cable thimble

Skip product gallery

Accessory Items

Antennenlitze aus Kupfer/Kevlar
Copper/Kevlar Antenna Wire
Copper/Kevlar Antenna Wire This antenna litz wire made of copper/Kevlar, is specially manufactured in the Netherlands for use as long wire, endfed, dipole or other antennas. The wire consists of a Kevlar core with approx. 1.1 mm2 tinned copper braid. The combination of Kevlar and copper gives an optimal mix of RF wire and tensile strength of about 50kg. In contrast to the pure copper braid, the length remains stable here, because the braid does not elongate over time. Thus, frequency and SWR remain stable over a long time. The insulation is made of high quality and UV-resistant PE. This antenna wire is therefore durable, strong, still flexible and has with only 14g per meter, a low weight. Ideal for travel (SOTA, IOTA; etc) but also perfect for a permanently installed antenna. Specifications: 1x 0,4 mm Kevlar core 24x 0.25 mm tinned copper. Copper section: 1.2 mm2 Weight: 14 grams per meter UV resistant black PE insulation Total diameter +/-2,5 mm Tensile force approx. 50kg

From €0.95*
Details
Antennenlitze aus Kupfer/Kevlar
Copper/Kevlar Antenna Wire
Copper/Kevlar Antenna Wire This antenna litz wire made of copper/Kevlar, is specially manufactured in the Netherlands for use as long wire, endfed, dipole or other antennas. The wire consists of a Kevlar core with approx. 1.1 mm2 tinned copper braid. The combination of Kevlar and copper gives an optimal mix of RF wire and tensile strength of about 50kg. In contrast to the pure copper braid, the length remains stable here, because the braid does not elongate over time. Thus, frequency and SWR remain stable over a long time. The insulation is made of high quality and UV-resistant PE. This antenna wire is therefore durable, strong, still flexible and has with only 14g per meter, a low weight. Ideal for travel (SOTA, IOTA; etc) but also perfect for a permanently installed antenna. Specifications: 1x 0,4 mm Kevlar core 24x 0.25 mm tinned copper. Copper section: 1.2 mm2 Weight: 14 grams per meter UV resistant black PE insulation Total diameter +/-2,5 mm Tensile force approx. 50kg

Content: 25 Laufende(r) Meter (€0.97* / 1 Laufende(r) Meter)

€24.25*
Antennenlitze aus Kupfer/Kevlar
Copper/Kevlar Antenna Wire
Copper/Kevlar Antenna Wire This antenna litz wire made of copper/Kevlar, is specially manufactured in the Netherlands for use as long wire, endfed, dipole or other antennas. The wire consists of a Kevlar core with approx. 1.1 mm2 tinned copper braid. The combination of Kevlar and copper gives an optimal mix of RF wire and tensile strength of about 50kg. In contrast to the pure copper braid, the length remains stable here, because the braid does not elongate over time. Thus, frequency and SWR remain stable over a long time. The insulation is made of high quality and UV-resistant PE. This antenna wire is therefore durable, strong, still flexible and has with only 14g per meter, a low weight. Ideal for travel (SOTA, IOTA; etc) but also perfect for a permanently installed antenna. Specifications: 1x 0,4 mm Kevlar core 24x 0.25 mm tinned copper. Copper section: 1.2 mm2 Weight: 14 grams per meter UV resistant black PE insulation Total diameter +/-2,5 mm Tensile force approx. 50kg

Content: 50 Laufende(r) Meter (€0.96* / 1 Laufende(r) Meter)

€48.00*
Rope clamp
Rope clamp
Rope clamp Clamcleat® CL260 - pack of 10 pieces Self-locking rope clamps made of high-strength, UV and cold-resistant material (tested in arctic conditions). Easily adjustable and retightenable at any time. For ropes of 2-4mm diameter. Ideal for Hamrope PES4. Material: nylon, color olive green or black, supplied in a pack of 10.

€7.50*
2-Loch UHF / PL Flanschbuchse SO-239
2-Loch UHF / PL Flanschbuchse SO-239
2-Loch UHF / PL Flanschbuchse SO-239 mit PTFE-Isolierung und vergoldetem Mittelkontakt.

€2.55*
Spule für Antennenlitze Mini Endfed rot
Wire reel for antenna wire
Wire reel for antenna wire With this reel with 15cm diameter, the antenna wire of the Endfed or Mini Endfed can be wound up safely without bending the wire. Ideal for mobile use when traveling, SOTA (Summit on the Air) or DX expeditions etc. Simply wind the antenna cable onto the spool and stow it in your backpack or bag. The bright yellow color makes it easy to find the reel in your bag. 15cm diameter 24mm wide For about 22m antenna wire with 1mm2

From €4.90*
Details
Hamrope PES 4 Abspannseil - 50m
Hamrope PES 4
Hamrope PES 4 Our best selling universal guy line for the radio amateur. For portable and stationary use. The quality polyester has excellent UV resistance and is suitable for long-term use. The elasticity of this braided rope has a shock absorbing effect and is desirable and often necessary for the use of radio amateurs. The attractive design allows the product to fit well into a natural environment, yet be perceived sufficiently. Hamrope PES 4 Polyester, 4mm diameter tensile strength approx. 260 daN(~Kg) Colour: olive green with red marker Length: 50 meter

From €17.50*
Details
Mini-Isolator für Drahtantennen
Mini insulator for wire antennas
Mini insulator for wire antennas Our mini insulators from our Endfed kits are now also available seperately. The Mini Isolator can be used multifunctionally, for example as strain relief for dipoles and EndFed antennas. Furthermore it is also suitable as a holder for Endfed antennas or balun housings. Features Color: ClearMaterial: Plastic UV resistantDimensions: 65 x 15 x 8 mm

€2.00*
2-Loch N Flanschbuchse Mit PTFE-Isolierung (hoch temperaturbeständig) und vergoldetem Mittelkontakt.
2-Loch N Flanschbuchse
2-Loch N Flanschbuchse Mit PTFE-Isolierung (hoch temperaturbeständig) und vergoldetem Mittelkontakt.

€4.49*
This website uses cookies to ensure the best experience possible. More information... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).