Mosquito End Fed 1:9 Antenna

Antenna wire SL - SuperLight The super-light and high-strength stranded antenna wire is specially manufactured for use as long wire, end-fed, dipole or other antennas. The antenna strand is only 1.6 mm thick and consists of 6x0.25 mm tinned copper braiding. It has a core of tear-resistant Vectran fibers® and a weatherproof PE insulation. This gives it a maximum breaking load of up to 60kg! The low weight of only 4g per meter makes it ideal for mobile operation, DX expeditions SOTA, IOTA, COTA or POTA. Super light antenna wire Weight only about 4g/m 6x0.25mm copper braid, tinned Core made of Vectran fibers® Cross-section approx. 0.3 mm2 Insulation made of waterproof PE (polyethylene), black Diameter: 1.6 mm Maximum breaking load approx. 60 kg

Die praktische Befestigung für deine Moskito End Fed am Spiderbeam-Mast!Mit der passgenauen Masthalteklammer lässt sich die Moskito End Fed einfach und sauber an einem Spiderbeam-Mast befestigen. Die Klammer ist speziell für diesen Einsatzzweck konstruiert und ermöglicht eine ordentliche Montage direkt am Mastelement.Ideal zum Beispiel für die Befestigung am 14. Element des Spiderbeam 10m Mini Mastes. So sitzt die Moskito End Fed dort, wo sie hingehört – ohne aufwendige Eigenkonstruktionen.Die Masthalteklammer wird im 3D-Druckverfahren aus PETG in Orange Transparent gefertigt. Das Material ist robust und für den praktischen Einsatz im Amateurfunk konzipiert.ProduktmerkmalePassgenau für die Moskito End Fed (1:49, 1:9, 1:1) und den vorgesehenen Spiderbeam-MastEinfache und praktische Befestigung am MastelementIdeal für den Spiderbeam 10m Mini, beispielsweise am 14. ElementHält auch an anderen Masten z.B. Spiderbeam 12m, 14m oder DX-Wire 3D-Druck aus PETG in Orange TransparentEntwicklung und Fertigung bei BonitoLieferumfang1x Masthalteklammer Moskito End Fed und Spiderbeam-Mast sind nicht enthalten.Informationen gemäß Art. 19 GPSR Adresse des Herstellers: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net Adresse der verantwortlichen Person: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net

Mosquito End Fed 1:9 Antenna Mosquito End Fed – small and light After the Mini-End Fed was so well accepted, we looked at how we could make the whole thing even smaller, more compact but robust. The main focus here was on weight. The result is the Moskito End Fed. Mosquito? Yes, because it is so tiny and light. The cylindrical housing with a height of only 70mm and a diameter of 25mm weighs just 50 grams. This makes the Moskito easy to stow in your pocket or backpack. The maximum output is 50 watts SSB PEP. It is available in 1:49 and 1:9. This makes the Moskito End Fed antenna ideal for portable use when traveling, QRP, COTA, POTA, IOTA, SOTA (Summit on the Air) or DX expeditions etc. The Moskito End Fed is suitable for the new generation of small multiband/multimode QRP transceivers such as the Icom IC-705, Xiegu G90 or X6100, LAB 599 TX500 or the Yaesu FT-817/818. Super light antenna wire To match the lightweight Moskito End Fed, we offer the new, super lightweight and high-strength antenna wire SL as an option. This antenna wire is only 1.6mm thick, weighs 4g per meter and consists of 6×0.25mm tinned copper wires. The stranded wire has a core made of tear-resistant Vectran fibers® and a weatherproof PE insulation. This achieves a maximum breaking load of up to 60kg! If you attach the antenna to the top of a telescopic mast and slide out the mast segments, you can be on air within a few minutes! To attach the housing of the 1:9 transformer to a mast, the mini insulator and a carabiner are all you need. Counter-poise If a counter-poise is required, you can connect a short piece of wire/strand with a length of 0.05 λ to the side connection of the mosquito antenna. The counter-poise should hang down freely.

Mosquito End Fed 1:49 – small and light After the Mini-End Fed was so well accepted, we looked at how we could make the whole thing even smaller, more compact but robust. The main focus here was on weight. The result is the Moskito End Fed. Mosquito? Yes, because it is so tiny and light. The cylindrical housing with a height of only 70mm and a diameter of 25mm weighs just 50 grams. This makes the Moskito easy to stow in your pocket or backpack. The maximum output is 50 watts SSB PEP. It is available in 1:49 and 1:9. This makes the Moskito End Fed antenna ideal for portable use when traveling, QRP, COTA, POTA, IOTA, SOTA (Summit on the Air) or DX expeditions etc. The Moskito End Fed is suitable for the new generation of small multiband/multimode QRP transceivers such as the Icom IC-705, Xiegu G90 or X6100, LAB 599 TX500 or the Yaesu FT-817/818. Super light antenna wire To match the lightweight Moskito End Fed, we offer the new, super lightweight and high-strength antenna wire SL as an option. This antenna wire is only 1.6mm thick, weighs 4g per meter and consists of 6×0.25mm tinned copper wires. The stranded wire has a core made of tear-resistant Vectran fibers® and a weatherproof PE insulation. This achieves a maximum breaking load of up to 60kg! If you attach the antenna to the top of a telescopic mast and slide out the mast segments, you can be on air within a few minutes! To attach the housing of the 1:9 transformer to a mast, the mini insulator and a carabiner are all you need. Counter-poise If a counter-poise is required, you can connect a short piece of wire/strand with a length of 0.05 λ to the side connection of the mosquito antenna. The counter-poise should hang down freely.