Skip to main content Skip to search Skip to main navigation

Stealth Flex 7 - Messi & Paoloni Coax Cable

Product information "Stealth Flex 7 - Messi & Paoloni Coax Cable"

Stealth-Flex 7 — 50 Ω Tactical Coaxial Cable (Messi & Paoloni)

Stealth-Flex 7 is a rugged, highly flexible 50 Ω coaxial cable with a matte, camouflaging outer jacket. Designed for invisible installations: it can be run discreetly along trees, fences or building edges — ideal for radio amateurs and preppers who value discretion and reliability.

Why this cable is ideal for radio amateurs & preppers

  • Invisible installation: matte, camouflaging outer jacket (military green) reduces visibility in woods, parks or around houses — perfect when antennas and feed lines should remain unobtrusive.

  • Discretion + reliability: low reflections and strong shielding provide dependable operation even in sensitive situations.

  • Rugged & flexible: built for frequent coiling, tight bend radius and a durable jacket surface — practical for bug-out bags, field boxes and mobile emergency radio kits.

  • Low loss at typical lengths: on short to medium runs (e.g., 10–30 m) performance for transmit and receive remains very good — important for QRP/emergency communications.

  • Versatile use: discreet permanent installation, temporary emergency links or as a tactical feed for mobile and outdoor installations.

Conclusion

The Stealth-Flex 7 from Messi & Paoloni is the right coax when you need discretion, toughness and good RF performance together. The matte, camouflaging outer jacket enables invisible installations — ideal for radio amateurs who want to hide feed lines and for prepper/emergency kits that must be compact, reliable and hard to detect.

Specific attenuation examples

  • 1.8 MHz — 10 m: ~0.11 dB · 20 m: ~0.22 dB · 30 m: ~0.33 dB

  • 3.5 MHz — 10 m: ~0.13 dB · 20 m: ~0.26 dB · 30 m: ~0.39 dB

  • 7 MHz — 10 m: ~0.17 dB · 20 m: ~0.34 dB · 30 m: ~0.51 dB

  • 14 MHz — 10 m: ~0.22 dB · 20 m: ~0.44 dB · 30 m: ~0.66 dB

  • 28 MHz — 10 m: ~0.30 dB · 20 m: ~0.60 dB · 30 m: ~0.90 dB

  • 50 MHz — 10 m: ~0.40 dB · 20 m: ~0.80 dB · 30 m: ~1.20 dB

  • 144 MHz — 10 m: ~0.69 dB · 20 m: ~1.38 dB · 30 m: ~2.07 dB

  • 430 MHz — 10 m: ~1.23 dB · 20 m: ~2.46 dB · 30 m: ~3.69 dB

For many amateur and emergency radio scenarios these losses at common lengths are negligible — especially when discretion is more important than minimal loss.

Technical specifications

  • Impedance: 50 Ω

  • Outer diameter: Ø ≈ 7.6 mm

  • Dielectric: foamed PE

  • Velocity factor (VF): approx. 83%

  • Shielding: double copper braid + foil

  • Temperature range: −40 °C to +60 °C

  • Bend radius: very flexible; designed for frequent winding/unwinding

  • Weight (100 m): approx. 5.4 kg

All technical data can be found in the datasheet.

Available formats & assembly options

  • Bulk (per metre) — from 1 m up to 500 m

  • Assembled — fitted with your choice of connectors such as PL-259, SO-239, BNC, N, SMA.

  • Tactical kits — pre-assembled lengths on reels with weather-proof terminations (optional).

Skip product gallery

Passendes Artikel

%
Messi & Paoloni EVO UHF Male (PL259) Connector for 7.3mm / .287" cables
Connector Selektion: Single
The EVO series connectors from Messi&Paoloni are perfect for 7,3mm diameter coaxial cables such as Ultraflex 7, Ultraflex 7PE or the new POTA-FLEX 7. The installation of these connectors is straightforward and is supported by helpful instructions on the packaging and clear videos. Thanks to their clever design with double sealing, the connectors offer excellent protection against water, moisture and condensation. Superior quality Made in Italy. Why choose this connector? Genuine Messi & Paoloni enhanced solder connector UHF Male (PL259) 2-Pack Compression design with double seal to ensure better protection against infiltration of water, humidity and condensation Easy installation and welding instructions included in the package (no braid soldering needed) Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses The UHF Evolution can be used up to 6000 MHz, a well made PL259 is barely acceptable up to 2000 MHz Model MP-CO.UHF.7M-S-EVO Product dimensions: 0.82 x 1.81 in. (2.1cm x 4.6cm) Wrench size: 0.63 in (16mm) For ULTRAFLEX 7 /.287'' cable Note: The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable.

€7.95* €8.34* (4.68% saved)
previously €8.33*
%
N-connector for 7mm Messi & Paoloni
Connector Selektion: Single
Messi & Paoloni N-connector for 7mm coaxial cable This high-quality N-connector from Messi & Paoloni is suitable for coaxial cable types: Ultraflex 7, PotaFlex 7, H 2007, HIGHFLEXX 7, Aircell 7 and similar. The solder N connector comes with a sealing ring, PTFE dielectric and gold-plated center pin. The two PTFE washers supplied make it easy to install the connector. The PTFE washers and a ring-shaped thickening on the center contact prevent the cable from being pulled out of its fixed position under mechanical stress.Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.Easy installation and welding instructions included in the package (no braid soldering needed).Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.The surfaces are treated with a special alloy called Smart3-Alloy®: it is corrosion-resistant and hypoallergenic.The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable (differently from standard PL259 which is exposed to strong thermical stress). Product dimensions: 2,1cm x 4,0cm Wrench size: 16mm (0,63 in) *Connectors are sold individually, image is for illustrative purpose. Code: CO.N.7M-S

€7.95* €8.46* (6.03% saved)
previously €8.45*
BNC-connector (plug) for 7 mm coax cables
BNC-connector (plug) for 7 mm coax cables This BNC connector is suitable for soldering to Ultraflex 7, HIGHFLEXX 7, Aircell 7 cable. It has a nikel-plated plug housing, PTFE dielectric and a gold-plated center contact. Also included is a piece of scraping tubing.

€5.80*
Tip
Cable Scissor Messi & Paoloni
Special scissors for cables specifically designed by Messi & Paoloni for ensuring a great accuracy in the cutting of each cable layers.  This cable scissor cuts cables 12mm like: RG58, H 155, Hyperflex 5, Ultraflex 7, Hyperflex 10, RG213 and many more. We use these cable scissors ourselves and cut all cables with it. It lays very good in the hand and you just have in the best control and feel the different layers of the coaxial cable and can cut exactly the desired part of the cable. This cable scissor from Messi and Paoloni is our recommendation to our customers 

€15.00*