Skip to main content Skip to search Skip to main navigation

End Fed Multiband Antenna for 10-15-20-40-80m 300Watts

Product information "End Fed Multiband Antenna for 10-15-20-40-80m 300Watts"

End Fed Multiband Antenna for 10-15-20-40-80m 300Watts PEP Phone

You don't have time to build an Endfed Multiband Antenna?

No problem. We offer you a ready assembled End Fed Multiband for the bands 10-15-20-40-80 meters up to 300 Watt PEP Phone. The antenna is tuned to band center. You only have to tune the antenna (as usual) minimally to the desired band section.

This End Fed Multiband Antenna includes the following parts in addition to the standard components:
Mounting plate, ring, thimble, ground connection, deluxe extension coil and a pressure equalization valve.

This End Fed Multiband Antenna comes with: Copper/Kevlar antenna litz wire

This antenna litz wire is manufactured specifically for antennas. The litz consists of a Kevlar core with approx. 1.1 mm2 tinned and fine stranded copper conductors. 1x 0.4 mm Kevlar and 24x 0.25 mm copper. The jacket is made of black UV-resistant PE. The total diameter is approx. 2.5 mm. The tensile strength is approx. 50 kg. You will receive a strong, flexible and relatively light antenna litz wire.

  • Type: Multiband
  • Length: approx. 23 meters
  • Connection: PL
  • Max. Power: 300Watt PEP Phone
  • Weight: ca  650g

Info

The measurements for this antenna were made on two 12m spider beam masts, 10 meters above the ground, in an open field, without any buildings.