LP060 Low Pass Filter

€45.00*

% €69.00* (34.78% saved)

Content: 1 Stück

Available, delivery time: 2-5 days

Product number: 0391

Product information "LP060 Low Pass Filter"

LP060 Low Pass Filter

The elliptically-formed low pass filter LP060 from NTi suppresses all frequencies above 60 MHz. Highly effective antennas combined with near-by strong FM stations often overburden the input of the radio and cause interference and phantom signals. The LP060 was developed aiming at the highest possible suppression in the 88MHz - 108 MHz FM band, whereas as the 6m amateur radio band at 50MHz is still totally within the pass band. For the greatest possible effectiveness, the low pass filter should be inserted directly before the receiver input.

Attenuation values (typ.):
52MHz: -1dB
60MHz: -3dB
80 MHz: -55dB
88-110 MHz: -90dB
110-150MHz: -75dB
150-200MHz: -70dB
200-400MHz: -65 dB

Dimension: 88mm x 31mm x 25mm (3,46 x 1,22 x 0,98 inch)

Input and output are DC-blocked (max. 50V DC)

Attention: Only suitable for reception, high HF (>10dbm) will cause permanent damage!

Successfully tested with: Elad FDM-S1 and FDM-S2, FiFi-SDR1.0 and 2.0, PM-SDR, Winradio Excalibur, RFSpace SDR-IQ

Made in Germany

Accessory Items

Pigtail Kabel BNC-BNC

Pigtail Kabel BNC-BNC 30cm Ideal zum sauberen Anschluss unseres Hochpassfliters HP0020, Tiefpassfilter LP060, Überspannungsschutz OVP1000 oder galvanischer Isolator GI300 an einen Receiver, Splitter usw. Messkabelqualität mit zwei BNC-Steckern, 50 Ω, Kabeltyp RG58/U-MIL-C17F, 30 cm lang.

€5.00*

Mini adapter cable

Mini adapter cable Very short, flexible adapter cable made of Hyperflex 5 for short connections in top quality. The mini adapter cable is the ideal solution if you either want to connect two devices of different sizes or need a short, flexible coax connection. If you want to connect small SDRs like the Airspy HF+ with accessories like the GI300/or GI1000, there is often a problem: the BNC adapter and the GI300 or GI1000 are much bigger than the HF+ SDR receiver. Now you could use a regular adapter cable, but since the GI300/1000 separates the ground from the line, the cable must be as short as possible, but still flexible enough to bridge the height difference. Also, it is often not a good idea to plug the GI 1000 directly into a device, as the weight could damage the socket. This mini adapter cable consists of a short piece of Hyperflex 5, about 10-14cm long and SMA or BNC connectors. The result is impressive and works very well.

From €12.50*

Details

BNC- BNC connector

BNC-Verbinder mit 2x BNC Stecker Ideal zum verbinden vom GI300, LP60 und HP020 an den Empfänger

€3.00*