HP0020 High Pass Filter

€39.00*

% €69.00* (43.48% saved)

Content: 1 Stück

Available, delivery time: 2-5 days

Product number: 0392

Product information "HP0020 High Pass Filter"

HP0020 High Pass Filter

The elliptically-formed high pass filter HP0020 suppresses all frequencies below 2 MHz. Strong or near-by transmitters in the long- or medium wave range can cause interferences and intermodulation in the shortwave range, which can effectively be suppressed with this filter. The HP0020 filter is very steep, so that signals in the upper medium wave range are already suppressed effectively. For the greatest possible effectiveness, the low pass filter should be inserted directly before the receiver input.

Attenuation values (typ.):
<0.50 MHz:-55dB
1.0MHz: -45dB
1.6 MHz:-35dB
2.0MHz: -3dB
>2.5 MHz: -1dB

Input and output are DC-blocked (max. 50V DC)

Dimensons: 88mmx31mmx25mm (3,46 x 1,22 x 0,98 inch)

Attention: Only suitable for reception, high HF (>10dbm) will cause permanent damage!
Because the filter is DC-blocked, it has to be inserted between the receiver input and the power inserter.

Successfully tested with: Elad FDM-S1 and FDM-S2, FiFi-SDR1.0 and 2.0, PM-SDR, Winradio Excalibur, RFSpace SDR-IQ

Accessory Items

BNC- BNC connector

BNC-Verbinder mit 2x BNC Stecker Ideal zum verbinden vom GI300, LP60 und HP020 an den Empfänger

€3.00*

Pigtail Kabel BNC-BNC

Pigtail Kabel BNC-BNC 30cm Ideal zum sauberen Anschluss unseres Hochpassfliters HP0020, Tiefpassfilter LP060, Überspannungsschutz OVP1000 oder galvanischer Isolator GI300 an einen Receiver, Splitter usw. Messkabelqualität mit zwei BNC-Steckern, 50 Ω, Kabeltyp RG58/U-MIL-C17F, 30 cm lang.

€5.00*

Mini adapter cable

Mini adapter cable Very short, flexible adapter cable made of Hyperflex 5 for short connections in top quality. The mini adapter cable is the ideal solution if you either want to connect two devices of different sizes or need a short, flexible coax connection. If you want to connect small SDRs like the Airspy HF+ with accessories like the GI300/or GI1000, there is often a problem: the BNC adapter and the GI300 or GI1000 are much bigger than the HF+ SDR receiver. Now you could use a regular adapter cable, but since the GI300/1000 separates the ground from the line, the cable must be as short as possible, but still flexible enough to bridge the height difference. Also, it is often not a good idea to plug the GI 1000 directly into a device, as the weight could damage the socket. This mini adapter cable consists of a short piece of Hyperflex 5, about 10-14cm long and SMA or BNC connectors. The result is impressive and works very well.

From €12.50*

Details