Product information "BNC connector crimp version for H155 and Hyperflex 5 coaxial cable"
BNC connector crimp version for H155 and Hyperflex 5 coaxial cable
This BNC connector is suitable for crimping to H155, Hyperflex 5, Aircell 5, Airborne 5 etc cable. It has a silver-plated plug housing, PTFE dielectric and a gold-plated center contact. Also included is a piece of scraping tubing.
Stripping tool for 5mm coax cable
Stripping tool for 5mm coax cables such as RG58U, H155, Hyperflex 5 Airborn 5, Aircell 5 etc. Quick and easy stripping without damaging the shielding and the inner conductor. Ideally suited for our BNC or SMA crimp connectors.
Handling is easy: open the stripping tool, clamp in the coax cable and turn the tool. Then the braid and the inner conductor are cut at the right distance. Now open it up, remove the cover and you're done.
Cutting lengths 4 - 8 mm
Messi & Paoloni Hyperflex 5 Low-Loss coax cable
A new breakthrough in the market standards! The new international reference point for attenuations, flexibility and screening efficiency for all 5,4mm/0,212'' cables! Best in its class
Extreme flexibility: perfect matching with rotator operated antennas, obtained by means of a sophisticated full copper stranded inner conductor (19 wires instead of 7).New improved dielectric: outstanding attenuations up to 6 Ghz, even better than some solid core cables of the competition.
Screening efficiency: >105 dB (SA) and improved sturdiness reached by adding 24 more wires to the braid, for a total of 120 wires, (88% coverage+ 100% foil). This leads to a dramatic reduction of the background noise. Moreover the braiders used are 24 spools, instead of 16 spools, giving 50% MORE CROSSOVERS.Lightweight: 4,4 Kg/100 m for a reduced stress of the “hanging and swinging" stretch of the cable in rotor operated antennas.
Excellent Power Handling!
The external PVC jacket is in black UV resistant PVC. Useful hint: the PVC used for the jacket of the cables, makes them extremely flexible but it's not suitable for underground laying. Every cable can be made with PE jacket, on specific request and for reasonable quantities in order to make them buriable.
ATTENUATION at 20°C
FREQUENCY dB/100m dB/100ft1,8 MHz 1,48 0,453,5 MHz 1,91 0,587,0 MHz 2,33 0,7110 MHz 2,63 0,8014 MHz 3,04 0,9321 MHz 3,64 1,1128 MHz 4,16 1,2750 MHz 5,58 1,70100 MHz 8,02 2,44144 MHz 9,66 2,94200 MHz 11,44 3,49400 MHz 16,37 4,99430 MHz 17,0 5,18800 MHz 23,48 7,161000 MHz 26,46 8,071296 MHz 30,5 9,302400 MHz 42,58 12,983000 MHz 48,1 14,664000 MHz 56,95 17,365000 MHz 65,29 19,906000 MHz 72,92 22,23
Our special heat shrink tube with MIL and UL approval. The inside is coated with an extremely adhesive hot melt adhesive. Due to the heating during the shrinking process, the adhesive melts and reliably fills all edges and bumps. In this way, a waterproof sheathing is achieved. We use these heat shrink tubing on all our cable assemblies for H155, Hyperflex 5 and Ultraflex 7 coaxial cables.
The shrinkage rate is approximately 3: 1.
The required shrink temperature is 120°C.
Continuous temperature resistance: - 55°C to + 110°C
Use
Electrical insulation, tabs, coaxial connectors, screwed connections
Technical information
Length: 30cm (11,8 inch) per bar
Diameter: 18mm
Standard color: black
Flammability: self-extinguishing
Handling
When cutting, make sure you have smooth cut edges.
Always start shrinking at one end.
Select the highest possible shrink temperature.
H155 Low-Loss coax cable bulk
The H 155 cable is a doubly shielded low-loss coax cable with foam dielectric and braided center conductor with a 5.4mm diameter. It is extremely flexible with a very low dampening factor and excellent shielding. Due to the small outer diameter similar flexible like RG-58, but with much better shielding and it is really low-loss. Available per meter up to 400 meters.
Technische Data H 155 PVCColour: greyUV: H 155 is UV-resistantImpedance: 50 ± 2 OhmInner conductor: 19 x 0,28 mmInsulation: Gas inj. PE 3,9 mmouter conductor: 1. Alufoil 0,008-0,03 x 18 mm AL-PET-AL 2 mm overlapping 2. copperbraid coverage 80% 16 x 8 x 0,1 mm; 4,5 mmOutside cover: PVC, 5,4 mm,Velocity factor: 0,81Capacity: 82 ± 2 pF/mScreening till 1 GHz: > 85 dBBending radius (min): 35 mmTemperature: from -30 --- +80°C / -16° F ---- 176°FResistance inside: 1,5 Ohm / 100 mLoop resistance: 3,2 Ohm / 100 mCopper: 22 kg / kmStrength: 100 N
Crimping plier Standard
Crimping pliers with crimping die (336A) for crimp connectors to coaxial cable RG 58, RG 59, RG 223, H 155 and Hyperflex 5. With ratchet mechanism for secure contact pressure. For: BNC, TNC, N, SMA. Crimping: 6.5mm; 5,45mm; 1,72mm
€25.00*
This website uses cookies to ensure the best experience possible. More information... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).