End Fed Multiband Antenna for 10-12-15-17-20-(30*)-40-80-160m 1000Watts

Quick Strap Mount for End-Fed Antennas – Ideal for Fast Setup and TakedownThis practical mounting strap lets you install your end-fed antenna in seconds – perfect for portable ham radio operations during outdoor activities, SOTA, POTA, or field days. The durable and flexible strap allows secure attachment to trees, poles, or posts without the need for tools.Designed for amateur radio operators who value mobility, speed, and convenience. Its lightweight and compact design makes it a must-have accessory for portable setups and temporary installations.Key Features:Fast and easy mounting for end-fed antennasTool-free installation – wrap around trees, poles, or postsPerfect for portable ham radio: SOTA, POTA, Field Days Lightweight and space-saving for easy transport Sturdy and flexible strap for reliable hold

This common-mode choke prevents the shield of the coaxial cable from becoming part of the antenna system and radiating unintentionally. It also serves to match the unbalanced coaxial cable to balanced antennas and can therefore be used as a “1:1” balun. Built according to the W2DU principle, the Wideband 2 KW choke is extremely broadband and low-loss. A large number of high-permeability ferrite sleeves (28 pieces) are threaded onto high-temperature-resistant PTFE coaxial cable, shrink-wrapped, and fitted with suitable connectors. This makes it easy to integrate into the coaxial feed line. The Wideband 2 KW common-mode choke is approximately 70 cm long, very broadband and provides about 1500 ohm of common-mode impedance in the frequency range from 160 m to 2 m (1 MHz to 200 MHz). It is weatherproof with shrink wrap and has two high-quality PL259 connectors with PTFE dielectric and gold-plated contacts at the ends. A PL259 connector with PTFE and gold-plated contacts is included. Important Notice: When using an End Fed antenna, do not place the common-mode choke directly at the feed point of the antenna! A section of coaxial cable with a length of ≥ λ 0.05 (e.g., about 4.2 m on the 80 m band) should be inserted between the End Fed transformer and the common-mode choke. Informationen gemäß Art. 19 GPSR Adresse des Herstellers: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net Adresse der verantwortlichen Person: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net

Common-Mode Choke / RFI-Choke Wideband (2 KW) – N-Version This wideband common-mode choke prevents the shield of the coaxial cable from becoming part of the antenna system and radiating unintentionally. It also helps match an unbalanced coaxial feed to balanced antennas and can therefore be used as a 1:1 balun.Built according to the W2DU principle, the wideband 2 KW choke delivers extremely broadband, low-loss performance. A large number of high-permeability ferrite sleeves are threaded onto high-temperature-resistant PTFE coaxial cable, shrink-wrapped, and fitted with high-quality N-type connectors, making it easy to integrate into your coaxial feed line.The choke is approximately 72 cm long and provides around 1500 ohms of common-mode impedance over a wide frequency range from 160 m to 2 m (1 MHz – 200 MHz). It is weatherproof, shrink-wrapped, and equipped with premium N-type connectors (plug and socket) with PTFE dielectric and gold-plated contacts.Important Installation Note:When using an end-fed antenna, do not install the choke directly at the antenna feed point. A section of coaxial cable with a minimum length of ≥ λ 0.05 (for example about 4.2 m on the 80 m band) should be placed between the end-fed transformer and the choke. FeaturesFrequency range: 1 MHz to 200 MHzAttenuation: approx. 32 dB – common-mode impedance approx. 1500 ΩConnectors: High-quality N-type male to N-type femalePower handling: approx. 2000 WWeight: 0.5 kgLength: 72 cmInformationen gemäß Art. 19 GPSR Adresse des Herstellers: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net Adresse der verantwortlichen Person: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net

Common-Mode Choke / RFI-Choke Standard 1 KW This common-mode choke prevents the shield of the coaxial cable from becoming part of the antenna system and radiating unintentionally. It also serves to match the unbalanced coaxial cable to balanced antennas and can therefore be used as a “1:1” balun.Built according to the W2DU principle, the 1 KW common-mode choke is extremely broadband and low-loss. A large number of high-permeability ferrites are threaded onto high-temperature-resistant PTFE coaxial cable, shrink-wrapped, and fitted with appropriate connectors. This makes it easy to integrate into the coaxial feed line.This Standard common-mode choke is approximately 45 cm long, very broadband, and provides about 1000 ohm of common-mode impedance in the frequency range from 80m to 2 m. It is weatherproof shrink-wrapped and has two high-quality PL259 connectors with PTFE dielectric and gold-plated contacts at the ends. A PL259 connector with PTFE and gold-plated contacts is included. Important Notice:When using an End Fed antenna, do not place the common-mode choke directly at the feed point of the antenna! A section of coaxial cable with a length of ≥ λ 0.05 (e.g., about 4.2 m on 80 m band) should be inserted between the End Fed transformer and the common-mode choke.Informationen gemäß Art. 19 GPSR Adresse des Herstellers: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net Adresse der verantwortlichen Person: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net

Common-Mode Choke / RFI-Choke Standard (1 KW) – N-Version This common-mode choke prevents the shield of the coaxial cable from becoming part of the antenna system and radiating unintentionally. It also helps match unbalanced coaxial feed lines to balanced antennas and can therefore be used as a 1:1 balun.Built according to the proven W2DU principle, this standard common-mode choke offers broadband performance with very low loss. A series of high-permeability ferrite cores are threaded onto high-temperature-resistant PTFE coaxial cable, shrink-wrapped, and fitted with high-quality N connectors, allowing easy integration into the coaxial feed line.The choke is approximately 48 cm long and provides around 1000 ohms of common-mode impedance across a wide frequency range from 80 m to 2 m. It is weatherproof, shrink-wrapped, and equipped with N-type connectors featuring PTFE dielectric and gold-plated contacts on both ends. Important Installation Note:When using an end-fed antenna, do not install the common-mode choke directly at the feed point. A section of coaxial cable with a minimum length of λ 0.05 (for example approx. 4.2 m on the 80 m band) should be installed between the end-fed transformer and the choke.FeaturesFrequency range: 3 MHz to 200 MHzAttenuation: approx. 25 dB – common-mode impedance approx. 1000 ΩConnectors: N-type male to N-type femalePower handling: approx. 1000 WWeight: 0.3 kgLength: 48 cmInformationen gemäß Art. 19 GPSR Adresse des Herstellers: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net Adresse der verantwortlichen Person: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net