End Fed Multiband Antenna for 10*-15-20-40-80m 1000Watts

Quick Strap Mount for End-Fed Antennas – Ideal for Fast Setup and TakedownThis practical mounting strap lets you install your end-fed antenna in seconds – perfect for portable ham radio operations during outdoor activities, SOTA, POTA, or field days. The durable and flexible strap allows secure attachment to trees, poles, or posts without the need for tools.Designed for amateur radio operators who value mobility, speed, and convenience. Its lightweight and compact design makes it a must-have accessory for portable setups and temporary installations.Key Features:Fast and easy mounting for end-fed antennasTool-free installation – wrap around trees, poles, or postsPerfect for portable ham radio: SOTA, POTA, Field Days Lightweight and space-saving for easy transport Sturdy and flexible strap for reliable hold

Common-Mode Choke / RFI-Choke Standard 1 KW This common-mode choke prevents the shield of the coaxial cable from becoming part of the antenna system and radiating unintentionally. It also serves to match the unbalanced coaxial cable to balanced antennas and can therefore be used as a “1:1” balun.Built according to the W2DU principle, the 1 KW common-mode choke is extremely broadband and low-loss. A large number of high-permeability ferrites are threaded onto high-temperature-resistant PTFE coaxial cable, shrink-wrapped, and fitted with appropriate connectors. This makes it easy to integrate into the coaxial feed line.This Standard common-mode choke is approximately 45 cm long, very broadband, and provides about 1000 ohm of common-mode impedance in the frequency range from 80m to 2 m. It is weatherproof shrink-wrapped and has two high-quality PL259 connectors with PTFE dielectric and gold-plated contacts at the ends. A PL259 connector with PTFE and gold-plated contacts is included. Important Notice:When using an End Fed antenna, do not place the common-mode choke directly at the feed point of the antenna! A section of coaxial cable with a length of ≥ λ 0.05 (e.g., about 4.2 m on 80 m band) should be inserted between the End Fed transformer and the common-mode choke.Informationen gemäß Art. 19 GPSR Adresse des Herstellers: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net Adresse der verantwortlichen Person: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net

Common-Mode Choke / RFI-Choke Standard (1 KW) – N-Version This common-mode choke prevents the shield of the coaxial cable from becoming part of the antenna system and radiating unintentionally. It also helps match unbalanced coaxial feed lines to balanced antennas and can therefore be used as a 1:1 balun.Built according to the proven W2DU principle, this standard common-mode choke offers broadband performance with very low loss. A series of high-permeability ferrite cores are threaded onto high-temperature-resistant PTFE coaxial cable, shrink-wrapped, and fitted with high-quality N connectors, allowing easy integration into the coaxial feed line.The choke is approximately 48 cm long and provides around 1000 ohms of common-mode impedance across a wide frequency range from 80 m to 2 m. It is weatherproof, shrink-wrapped, and equipped with N-type connectors featuring PTFE dielectric and gold-plated contacts on both ends. Important Installation Note:When using an end-fed antenna, do not install the common-mode choke directly at the feed point. A section of coaxial cable with a minimum length of λ 0.05 (for example approx. 4.2 m on the 80 m band) should be installed between the end-fed transformer and the choke.FeaturesFrequency range: 3 MHz to 200 MHzAttenuation: approx. 25 dB – common-mode impedance approx. 1000 ΩConnectors: N-type male to N-type femalePower handling: approx. 1000 WWeight: 0.3 kgLength: 48 cmInformationen gemäß Art. 19 GPSR Adresse des Herstellers: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net Adresse der verantwortlichen Person: Bonito - Gerichtsweg 3 - 29320 Hermmansburg - anfragen@bonito.net- www.bonito.net

Multi Isolator Maxi 120x16x16mm Der Multi Isolator Maxi aus Polycarbonat, ist stark, leicht, witterungs- und UV-beständig. Der Multi Isolator Maxi ist multifunktional einsetzbar, zum Beispiel als Zugentlastung für Dipole und EndFed Antennen. Abmessungen; 120x16x16mm Material: Wetter und UV-beständigiges Polycarbonat Isolator, Endfed, Fritzel, Dipol, Antennen, Hamradio, Amateurfunk , FR1901, fritzel isolator

1 – 30 MHz Common mode filter with bifilaire windings for optimal attenuation There are many types of common mode chokes available, HF Kits opts for a common mode choke with bifilar windings for optimal filtering. This 1 – 30 MHz common mode current filter is optimized for the 80 and 160 meter band. In this case a FT240-31 toroidal core with optimal performance for the lower frequency range is used. The 1 – 30 MHz common mode choke performs very well on the entire HF spectrum. The attenuation is therefore around 30 dB across the entire HF frequency spectrum. This filter is therefore a real all-rounder for amateurs who want to work from 160 meters to 10 meters. Even people who deal with LPAM (Medium Wave) can use this filter. The main reason for using a common mode choke is to ensure that the coax cable’s shield does not become part of the antenna system and will radiate unintentionally. This has all sorts of nasty effects, think of: interference issues, disrupted radiation pattern of the antenna and a higher noise level. This last point is because not only does the coax cable’s shield radiate when you transmit, but the shield also works as a receiving antenna. Because the coax cable often makes a considerable trip within the house, close to interference sources (mains, PLC etc…) It is useful to eliminate these sources of interference. Any way, Good reason to use a common mode choke. The effect of this common mode choke with bifilar windings is difficult to predict. This depends on local circumstances. Think of: antenna type, antenna placement, type of feed line, feed line placement and especially local sources of interference. There are manufacturers that promise in advance a significant drop in interference, however this is not real. There are cases where the noise level decreases by two to three S points, but also cases where the filter has almost no effect. This kit includes: IP65 enclosure 100 x 100 x 55 mm (Polycarbonat) Ringcore Amidon FT240-31 Winding wire 18 AWG – 4x 85cm PTFE 19 x 0.25 mm copper “Silver plated” Toroid mounting plate Stainless steel M3 6mm screws 4x Stainless steel M3 Spring washer 4x 2x PL 259 Chassis 2x M3 cable lug 8x Stainless steel M3 Bolt 12mm 8x Stainless Steel M3 Nut 8x Stainless steel M3 washer 8x Stainless steel M3 tooth washer IMPORTANT! Do not place the common mode choke in case of an End Fed antenna directly at feed point of the antenna.