7,5 Volt plug AC Adapter (power supply)

MegActiv MA305FT Wide Band Active Antenna Wide frequency range 9kHz – 300MHz Small dimensions Dual Power Supply: 5,5V – 15V Selectable FM band stop filter with low pass function Ideal for traveling, at home or DX-Camps IP3:>typ. +30dBm / IP2:>typ. +50dBm Enlarged and flexible 200mm radiating element The new MegActiv MA305FT is an evolution of the popular MegActiv MA305. In addition to small improvements in electronics, the new MegActiv MA305FT has been equipped with a switchable FM band-stop filter. Thus, disturbing radiation from the FM band between 88 and 108 MHz can be easily minimized The new MegActiv MA305FT close the gap between the Boni-Whip and the GigActiv GA3005 E-Field Antennas. This low noise active antenna, which is produced according to the highest standards, covers the frequency range between 9kHz and 300MHz. With a radiating element of only 22 cm / 8,66 inch it can be erected inconspicuously. It can be powered with 5-15 V DC (max.10mA) and alternatively with the supplied Power unit CPI 1500DP via USB. Flexible FM-band stop filter Based on the well proven Megactiv platform, an additional low pass filter and a FM-band stop filter were integrated which can be activated or deactivated with a jumper. In case of FM-interferences, the FM bandstop filter can be activated with a jumper and so FM signals between 88 MHz and 108 MHz will be attenuated by 25 – 40 dB. Flexible power supply The MegActiv MA305FT can be operated by two different kinds of power sources. It can be powered either by a conventional plug power supply (5,5 / 2,1mm round plug) or via USB with a optional Cable. Powering via USB has the advantage that no external power supply is needed and that the antenna can be operated  autonomously and noise-free with a separate USB PowerBank. The supply voltage range is 5 - 15V DC (10mA max) and thus the antenna is also well suited for portable use. You want to test the MegActiv MA305FT live on air? If you would like to test the MegActiv MA305FT active antenna live, you can now conveniently do this over the Internet with a KIWI SDR. Just click on this Link and you can browse the whole band from 10kHz to 30MHz. The linked KIWI-SDR with a MegActiv MA305FT is located in Bonn (DL0DTM Clubstation Deutsche Telekom) and can handle up to 4 users at a time. Features Integrated double surge protection of the active components: Coarse protection by gas discharge tubes with 60V firing voltage with max. pulse leakage current 1kA (8/20µs) with additional integrated ESD fine protection of max. 2kV. Standard delivery with Power unit CPI1500DP (external power supply and USB-operation possible) IP3:>typ. +30dBm IP2:>typ. +50dBm Integrated double overvoltage protection of the active antenna part Integrated double surge protection of the active components: Coarse protection by gas discharge tubes with 60V firing voltage with max. pulse leakage current 1kA (8/20µs) with additional integrated ESD fine protection of max. 2kV. Fernando from Fenu-Radio.ch did the first comparison Test in Mai 2015 and released this test on his Page in German: www.fenu-radio.ch. Quote from the review by FenuRadio: (translated) "The NTi MegActiv is a small receiving antenna with excellent reception performance. The construction proved to be unproblematic, similar to the Boni-Whip. From VLF up on the FM band, the MegActiv receives very well despite their small size. When properly setup it provides a nearly unbeatable signal / noise ratio!" Whats in the box? MegActiv MA305FT Whip / Radiator Junction box CPI1500DP Made in Germany Please note! The offered coax cables are custom-made and therefore not returnable / refundable.

MegaLoop FX Active Loop Antenna Probably the most flexible active loop antenna Ultra broadband frequency range from 9kHz - 180MHz High dynamic range with an IP of typ. +40 dB and IP 2 of typ. +85 dB Power requirements: 5V - 15V Selectable FM band stop filter with low pass function Selectable amplification in three steps Various radiating elements and sizes can be used Indoor and outdoor use Additional ground terminal (M5) on the enclosure High-quality craftsmanship; splash-water proof enclosure; all screw terminals made of stainless steel Small packaging = small shipping costs Ideal for outdoor use because dismountable and USB power supply The Megaloop FX is our latest active loop amplifier for the 9kHz to max. 180MHz range. It combines  all the outstanding features of the successful MegaLoop ML 200 and ML 052. Due to its integrated selectable FM band stop filter and the three-step amplification a maximum of flexibility for all kinds of use is possible. Flexible range of application This broadband magnetic loop antenna is especially suitable for places with difficult reception due to electrical interferences (E-field) in the near-field area, it is also made for indoor use or on the balcony/patio. You can put it up in the attic, at the window, on the balcony, in the carport fixed to the wall or permanently attached to a mast. Flexible FM-band stop filter Based on the well proven MegaLoop platform, an additional low pass filter and a FM-band stop filter were integrated which can be activated or deactivated with a jumper. In case of FM-interferences, the FM bandstop filter can be activated with a jumper and so FM signals between 88 MHz and 108 MHz will be attenuated by 25 - 40 dB. Flexible three-step amplification The gain of the MegaLoop FX can be adjusted in three steps by an internal jumper (High/Medium/Low)Frequency response (-3dB) and nominal amplification. a) FM-band stop off1. High Gain: 9 kHz - 110 MHz and 25 dB gain2. Medium Gain: 9 kHz - 150 MHz and 20 dB gain3. Low Gain: 9 kHz - 180 MHz and 15 dB gain b) FM- band stop on:1. High Gain: 9 kHz - 52 MHz and 25 db gain2. Medium Gain: 9 kHz - 60 MHz and 20 dB gain3. Low Gain 9 kHz - 66 MHz and 15 dB gain Flexible loop sizes The MegaLoop FX makes the most diverse radiating elements possible. As standard, a loop made of flexible PVC-coated and seawater-resistant (V4A) stainless steel wire is available. It comes as a 5m (16,40ft) circumference loop for indoor and portable as well as for outdoor use. Other lengths, such as 10m (32,81ft), are on offer. Even lengths up to 20m (65,62ft) have successfully been tested. Additionally, an aluminum rigid loop with a diameter of 40 cm or 80 cm is also available. Due to its versatility and adjustment of amplification, there will always be an ideal combination of the loop size and amplification. Excellent IP values with power supply as low as 5V With two signals in the 7 MHz range, an excellent IP3 value of typ. +40 dB and a IP 2 value of +85 dBm is achieved with mere 5 V ( max. 40mA) and so the loop can be powered via USB or power bank. A DualPower power inserter (bias tee) supply is included in the standard scope of delivery. The MegaLoop can be operated by two different kinds of power sources. It can be powered either by a conventional plug power supply (5,5 / 2,1mm round plug) or optional Cable via USB. Powering via USB has the advantage that no external power supply is needed and that the antenna can be operated independently and noise-free with a separate USB PowerBank. The supply voltage range is 5 - 15V DC (40mA max) and thus the antenna is also well suited for portable use. Integrated threefold surge protection of the active parts Coarse protection by gas arrester with 60V trigger voltage and a max. pulse leakage current of 1 kA (8/20µs) and by twofold additional integrated fine protection of max. 2 kV and 8 kV respectively. Additionally, the loop connections are connected to ground with high impedance to avoid static charges. Low shipping costs - no bulky item ! Since the antenna can be shipped as such a small parcel, there will only be standard postage and when ordering a rigid loop of 1m or 2m diameter you will already save about 35,-€ compared to shipping as a bulk item. Hint: With two suction cups you can attach the MegaLoop antenna to a window at home, in a hotel or when on the road. Because of its flexible loop, transportation is really a piece of cake. In our newsroom test " Design of a really portable SDR Part 2" I simply put the loop over the tailgate of our Caddy and was able to receive signals beautifully. You want to test the MegaLoop FX live on air? If you would like to test the MegaLoop FX live, you can now conveniently do this over the Internet with a KIWI SDR. Just click on this Link and you can browse the whole band from 10kHz to 30MHz. The linked KIWI-SDR with MegaLoop and 6,8 Meter Loop is located in northern Germany and can handle up to 4 users at a time. Scope of delivery MegaLoop FX 5m (16,40ft) PVC-coated, seawater-resistant stainless steel wire. Power inserter CPI 1500DP Manual Made in Germany Recommendation Near the sea or in case of possible contact with salt water we strongly recommend the use of our weather protection case. Please note! The offered coax cables are custom-made and therefore not returnable / refundable.

GigActiv GA3005 Extreme Wideband Active Antenna Frequency range : 9 kHz - 3 GHz Power Supply: 5,5V - 12V Gain: + 3dB Upper Frequency Limit (-1db): 3000 MHz IP3: > +30 dBm typ. IP2: > +50 dBm typ. Where space is at a premium or you live in an area where an antenna is considered an undesirable element in neighborhood, the new GigActiv GA3005 is the ideal solution for the avid listener with a wide band receiver. The low noise GigActiv 3005 Extreme Wideband Active Antenna by NTi covers the whole frequency range from 9 kHz – 3 GHz. The antenna radiator measures only 10 cm (approx 4 inches) and so the unit can be mounted unobtrusively. The antenna requires a supply voltage of  5 –12V DC  (max. 120mA) fed through the coax cable via the standard supplied  DC interface CPI3000DP. It can also be powered via USB with slightly reduced performance. This is perfect for portable use in combination with a PC, which powers the antenna or the antenna can be powered autonomously and noise-free with a separate USB power bank. For shortwave and above 200MHz an IP3 of  typically > +30dBm is achieved. USB-powering possibleLarge supply voltage range of 5-12V. Thus it can be powered by a regular 12 Volt power supply or even via USB. Autonomously and noise- free via a separate USB Power Bank as well. Whats in the Box?- GigActiv GA3005- Radiator- Junctionbox CPI3000DP (DC interface) Dimesions incl Radiator:185 x 57 x 35mm  (7.28 x 2,24 x 1,38 inch) Made in Germany Please note! The offered coax cables are custom-made and therefore not returnable / refundable.

Boni-Whip Active Antenna 20kHz - 300MHz Wide frequency range 20 kHz - 300 MHz Small dimensions  Ideal for traveling, at home or DX-Camps The BONI-WHIP active antenna replaces the very successful Mini-Whip antenna. Despite its size (only approx. 17 cm long), it renders excellent reception results on longwave, mediumwave and shortwave and additionally for VHF up to 300 MHz. We developed this antenna ourselves and it is built here in Germany, so it really is “Made in Germany” by Bonito. The antenna offers a lot of improvements and better values than the original Mini-Whip. In our newsroom you can see a benchmark test between the Boni-Whip vs. the Mini.Whip: http://newsroom.bonito.net Even on very low frequencies the Boni-Whip produces very good reception results. It can be used beginning with 20 kHz and is a good choice for listeners who are interested in low frequencies. We also thought about radio listeners who are interested in high frequencies and extended the range to 300 MHz. Even with only a little effort you can achieve fantastic reception results; and because of its small size, the antenna can be erected inconspicuously.  The active antenna circuitry is cased in a weather resistant box. The voltage supply is delivered by the antenna cable and the included power supply module.  Boni-Whip: As flexible as you Because of its interchangeable radiating elements (Whips) the Boni-Whip can be used with different elements for experiments. The antenna can thus be adjusted to the surrounding environment or a special reception area. Customer comment I have performed extensive outdoor tests on the Boni-Whip at various locations in Germany, Austria, and USA; and even I am amazed that we have produced an antenna with such small size, mobility and excellent performance/price ratio. You will get a noticeably better antenna for almost the same price as the original Mini-Whip. Boni-Whip: Quality made in Germany The electronics of the Boni-Whip are manufactured in Germany by an ISO9000-certified assembly company in industrial quality and assembled by us in the Bonito QTH. Technical data Boni-Whip Frequency range: 20 kHz -300 MHz Voltage supply: 12V-15V Gain: 3dB Upper Frequency Limit: (-1db): 300 MHz IP3: +32.5 dBm IP2: +55 dBm What's in the Box:  Boni-Whip active Antenna  Junction box  Whip / Radiator 5,5mm/2,1mm barrel DC power connector What else do i need? The Boni-Whip shortwave antenna is delivered without a coaxial cable, as everyone needs a different length. We offer you the right coaxial cables such as the H155 or the even better shielded Hyperflex 5 in different lengths. You need two coax cables: A coax cable between the Boni-Whip and the feeder with BNC plugs. In addition, another coaxial cable, from the feed switch (BNC plug) to your receiver. A stabilized 12V DC transformer power supply (no switching power supply!) Which can deliver approx. 150mA with a 5.5 / 2.1mm barrel connector is required for the power supply. The mast bracket, which is available in 28mm and 40mm, is useful for mounting on the mast etc. The OVP1000 surge arrester can also be useful for current weather events. To protect the BNC connector against weather influences, we offer a self-vulcanizing adhesive tape called NittoTape. If you want a little more amplification, you can also use the longer and flexible radiator, which brings approx 3 dB more level. Please note: The offered coaxial cables are custom-made and cannot be exchanged at a later date!Total length of the cable: cable cut +/- 3% + connector