GigActiv GA3005 Ultra Wideband

Product information "GigActiv GA3005 Ultra Wideband"

GigActiv GA3005 Extreme Wideband Active Antenna

Frequency range : 9 kHz - 3 GHz
Power Supply: 5,5V - 12V
Gain: + 3dB
Upper Frequency Limit (-1db): 3000 MHz
IP3: > +30 dBm typ. IP2: > +50 dBm typ.

Where space is at a premium or you live in an area where an antenna is considered an undesirable element in neighborhood, the new GigActiv GA3005 is the ideal solution for the avid listener with a wide band receiver. The low noise GigActiv 3005 Extreme Wideband Active Antenna by NTi covers the whole frequency range from 9 kHz – 3 GHz. The antenna radiator measures only 10 cm (approx 4 inches) and so the unit can be mounted unobtrusively. The antenna requires a supply voltage of 5 –12V DC (max. 120mA) fed through the coax cable via the standard supplied DC interface CPI3000DP. It can also be powered via USB with slightly reduced performance. This is perfect for portable use in combination with a PC, which powers the antenna or the antenna can be powered autonomously and noise-free with a separate USB power bank. For shortwave and above 200MHz an IP3 of typically > +30dBm is achieved.

USB-powering possible
Large supply voltage range of 5-12V. Thus it can be powered by a regular 12 Volt power supply or even via USB. Autonomously and noise- free via a separate USB Power Bank as well.

Whats in the Box?
- GigActiv GA3005
- Radiator
- Junctionbox CPI3000DP (DC interface)

Dimesions incl Radiator:
185 x 57 x 35mm (7.28 x 2,24 x 1,38 inch)

Made in Germany

Please note!

The offered coax cables are custom-made and therefore not returnable / refundable.

Accessory Items

H155 Low-Loss Coax Cable pre-fabricated

H155 Low-Loss coax cable pre-fabricated Bonito pre-fabricated H 155 coaxial cable with connectors upon your request. The connectors are either soldered (PL) or crimped (BNC and N) and tested. The available lengths are based on most customers needs. Other lengths are available and can be delivered according to your request. Should you need other lengths or plugs, please, contact us; we love to help you. The H 155 cable is a doubly shielded low loss coax cable with a 5.4mm diameter. It is extremely flexible with a very low dampening factor and excellent shielding. We have discribed the major differences between H155 and RG58U with many real examples in a Bonito Newsroom article: "Why even good antennas need good Coax cable": Read more Technical data:Colour: greyUV: H 155 is UV-resistantImpedance: 50 ± 2 OhmInner conductor: 19 x 0,28 mmInsulation: Gas inj. PE 3,9 mmouter conductor: 1. Alufoil 0,008-0,03 x 18 mm AL-PET-AL 2 mm overlapping 2. copperbraid coverage 80% 16 x 8 x 0,1 mm; 4,5 mmOutside cover: PVC, 5,4 mm,Velocity factor: 0,81Capacity: 82 ± 2 pF/mScreening till 1 GHz: > 85 dBBending radius (min): 35 mmTemperature: from -30 --- +80°C / -16° F ---- 176°FResistance inside: 1,5 Ohm / 100 mLoop resistance: 3,2 Ohm / 100 mCopper: 22 kg / kmStrength: 100 N

€16.90*

Details

Tip

Steckernetzteil mit zusätzlichem Entstörfilter

7,5 Volt plug AC Adapter with additional noise filter (power supply)

7,5 Volt plug AC Adapter with additional noise filter Low noise unstabilizied 7,5 Volt max. 150mA plug power supply adapter with transformer (no switching power supply). 230 Volts only! This power supply is linear regulated and is no switching power supply. A "real" transformer is installed. Good for active antenna applications such as MegaLoop, MegActiv, MegaDipol and GigActiv. With additional noise filter Interference suppression for network-related interference at the output: 150kHz - 30MHz:> 25dB In the medium wave range even> 40dB Technical data Input: 230V AC / 50Hz / 3,6 W Output: 7,5 V DC / max. 150 mA (10,5 Volt idle) Dimensions without connectors: 75 x 55 x 60mm Weight: 100 grams Euro Plug Made in Germany

€17.99*

Antenna mast mounting bracket for Boni-Whip, MegActiv, GigActiv and Megaloop

This V4A mounting bracket fits for the Boni-Whip, MegActiv, GigActiv and the MegaLoop.

From €17.99*

Details

CCMC30 Common Mode Noise Filter

CCMC30 Common Mode Noise Filter Noise filters are nothing new and are often used for transmitting purposes. They are used to prevent unwanted radiation via the coax shielding. It is less known that they can also suppress unwanted radiation when receiving signals, especially when an active antenna is used. However, in this case, the situation is reversed: en route to the antenna, unwanted interferences from electric home appliances can be effectively eliminated. NTi's Coaxial Common Mode Noise Filter (CCMC30) has been especially optimized for maximum common mode noise rejection of >30dB wide band in the frequency range of 150kHz - 30MHz. With slight limitations a much wider frequency range is covered. In the medium wave range for example a noise suppression of up to 45 dB can be achieved. This is possible by using a cascaded system of ferrite cores with various frequency dependent material properties, combined with high quality coaxial cable. For outdoor use, the system is housed in a water-proof enclosure. We recommend to connect the CCMC30 as closely as possible to the receiver.With regard to efficient noise suppression, the CCMC 30 is not very much different from the galvanic isolator GI1000. However, the CCMC30 performes down to lowest frequencies including DC voltage, in contrast to the GI1000, which blocks DC voltages and very low frequencies. The CCMC30 can thus be connected directly to the coax cable which passes the supply voltage or the control signals to the active antenna. A series connection of the GI1000 directly connected to the receiver followed by the CCMC30 right behind the power inserter may result in an even better performance. Technical Data Guaranteed frequency range: 150 kHz – 30 MHz Common Mode Wave suppression: >30 dB: 150 kHz -30MHz (>20 dB: 30kHz-60MHz) Insertion loss: <1 dB (up to max. 150 MHz) Size: 100x68x50mm (132mm with BNC connectors) Connectors: 2x BNC 50Ohms Weight: 320g Made in Germany

€99.99*