End Fed 10-20-40m Multiband Antenne DIY-Bausatz - 100Watt PEP

End Fed multiband antenna DIY kit for 10-20-40m 100Watt PEP SSB

New extended kit! 

This kit contains all the necessary components to build an EndFed 1:49 multiband antenna for the bands 10-20-40meters up to 100 Watt PEP Phone. We have added a connection for the counterweight and the useful stainless steel ring etc. to the kit. 

This End Fed kit is supplied with the antenna wire of your choice: 

Standard antenna wire: This antenna wire consists of 1.0 mm2 fine stranded copper conductor with black PVC insulation. The total diameter is approx. 2 mm. Ideal for experiments or vacation antennas. As the core is only made of copper, this stranded wire will become slightly longer and therefore thinner over time. The tensile strength of this stranded antenna wire is limited. 

Copper/Kevlar stranded antenna wire This stranded antenna wire is specially manufactured for antennas. The stranded wire consists of a Kevlar core with approx. 1.1 mm2 tinned and fine-stranded copper conductors. 1x 0.4 mm Kevlar and 24x 0.25 mm copper. The sheathing is made of black UV-resistant PE. The total diameter is approx. 2.5 mm. The tensile strength is approx. 50 kg. You receive a strong, flexible and relatively light antenna strand.

The kit contains the following components: 

1x toroidal core FT-140-43
1x enameled copper wire GR2 for winding the toroidal core (1mm) approx. 1.0 meters
1x polycarbonate housing with transparent cover 100x100x60 mm (IP67)
1x mini insulator 65 * 15mm
2x simplex terminals up to 2 mm wire (wire rope terminal)
1x thimble approx. 23.5 meter antenna wire 1mm² black
1x capacitor 100pF 2kV DC 1x PL259 panel jack
1x extension coil 34uH ready wound and measured
1x shrink tube black 25.4-12.7mm
1x various screws, washers and nuts made of stainless steel
1x stainless steel ring 3x Fast-On ring contact

Type: Multiband
Length: approx. 12 meters
Connection: PL
Max. Power: 100Watt PEP Phone
Weight: approx. 550g
Balun 1:49