PL-connector UHF-Special 6mm

Special scissors for cables specifically designed by Messi & Paoloni for ensuring a great accuracy in the cutting of each cable layers.  This cable scissor cuts cables 12mm like: RG58, H 155, Hyperflex 5, Ultraflex 7, Hyperflex 10, RG213 and many more. We use these cable scissors ourselves and cut all cables with it. It lays very good in the hand and you just have in the best control and feel the different layers of the coaxial cable and can cut exactly the desired part of the cable. This cable scissor from Messi and Paoloni is our recommendation to our customers 

This rubber sleeve protects plug connections from corrosion and prevents water from entering the installed plug such as BNC, PL and N plugs. For coaxial cables with a diameter of 4.5 to 12 mm. Total length not shortened approx. 14.5 cm. Do you want to protect your BNC, PL or N connector from the weather outside on the antenna? This can be done quickly and easily with this rubber grommet: simply pull the rubber grommet over the cable before installing the connector, mount the connector and then pull the grommets back up. Now cut off the rubber grommet to match. Finished! Ideal if you frequently change the antenna or for temporary setup at DX camps, field days etc. You can order this rubber sleeve with the ready-made cables. The cuff is then fitted to match immediately.

Messi & Paoloni Hyperflex 5 Low-Loss coax cable A new breakthrough in the market  standards! The new international reference point for attenuations, flexibility and screening efficiency for all 5,4mm/0,212'' cables!  Best in its class Extreme flexibility:  perfect matching with rotator operated antennas, obtained by means of a sophisticated full copper stranded inner conductor (19 wires instead of 7).New improved dielectric: outstanding attenuations up to 6 Ghz, even better than some solid core cables of the competition.  Screening efficiency:  >105 dB (SA) and improved sturdiness reached by adding 24 more wires to the braid, for a total of 120 wires, (88% coverage+ 100% foil). This leads to a dramatic reduction of the background noise. Moreover the braiders used are 24 spools, instead of 16 spools, giving 50% MORE CROSSOVERS.Lightweight:  4,4 Kg/100 m  for a reduced stress of the “hanging and swinging" stretch of the cable in rotor operated antennas. Excellent Power Handling! The external PVC jacket is in black UV resistant PVC. Useful hint: the PVC used for the jacket of the cables, makes them extremely flexible but it's not suitable for underground laying. Every cable can be made with PE jacket, on specific request and for reasonable quantities in order to make them buriable. ATTENUATION at 20°C FREQUENCY dB/100m dB/100ft1,8 MHz 1,48 0,453,5 MHz 1,91 0,587,0 MHz 2,33 0,7110 MHz 2,63 0,8014 MHz 3,04 0,9321 MHz 3,64 1,1128 MHz 4,16 1,2750 MHz 5,58 1,70100 MHz 8,02 2,44144 MHz 9,66 2,94200 MHz 11,44 3,49400 MHz 16,37 4,99430 MHz 17,0 5,18800 MHz 23,48 7,161000 MHz 26,46 8,071296 MHz 30,5 9,302400 MHz 42,58 12,983000 MHz 48,1 14,664000 MHz 56,95 17,365000 MHz 65,29 19,906000 MHz 72,92 22,23

Our special heat shrink tube with MIL and UL approval. The inside is coated with an extremely adhesive hot melt adhesive. Due to the heating during the shrinking process, the adhesive melts and reliably fills all edges and bumps. In this way, a waterproof sheathing is achieved. We use these heat shrink tubing on all our cable assemblies for H155, Hyperflex 5 and Ultraflex 7 coaxial cables. The shrinkage rate is approximately 3: 1. The required shrink temperature is 120°C. Continuous temperature resistance: - 55°C to + 110°C Use Electrical insulation, tabs, coaxial connectors, screwed connections Technical information Length: 30cm (11,8 inch) per bar Diameter: 18mm Standard color: black Flammability: self-extinguishing Handling When cutting, make sure you have smooth cut edges. Always start shrinking at one end. Select the highest possible shrink temperature.

RG58 CU MIL-C-17G Koaxialkabel made in Italy by SIVA Cavi Dieses RG58 CU ist ein flexibles und preiswertes Koaxialkabel aus dem Hause SIVA. Es kommt aus Italien und entspricht dem höchsten UL-Standard MIL C 17 "G". Das Kabel besitzt eine Kupferlitze verzinnt als Innenleiter. Der Außenleiter aus verzinntem Kupfergeflecht, mit 112x0,13mm Drähten, einer Abdeckung von 94% und einer Schirmung von >57dB.  Aufbau Innenleiter 19 x 0,18 mm CU SN CU SN = Kupfer verzinnt Isolation 2,95 mm PE ± 0,1 Außenleiter Cu-Geflecht verzinnt, mit 112 x 0,13mm Drähten und 95%Abdeckung Mantel 5mm PVC2 schwarz ± 0,2 Bruchlast 139 N Biegeradius min. 25 mm Kupferzahl 18,7 kg/km Temperaturbereich -30°C bis +70°C Elektrische Daten Impedanz 50 Ohm ± 3 Kapazität 100 pF/m Verkürzungsfaktor 0,66 Schleifenwiderstand 53 Ohm/km Schrimung; bis 900MHz >57dB Wichtig! Wir können von diesem RG50 CU Kabel maximal 100 Meter am Stück liefern, da wir ausschließlich 100m Rollen am Lager haben.

H155 Low-Loss coax cable bulk The H 155 cable is a doubly shielded low-loss coax cable with foam dielectric and braided center conductor with a 5.4mm diameter. It is extremely flexible with a very low dampening factor and excellent shielding. Due to the small outer diameter similar flexible like RG-58, but with much better shielding and it is really low-loss. Available per meter up to 400 meters. Technische Data H 155 PVCColour: greyUV: H 155 is UV-resistantImpedance: 50 ± 2 OhmInner conductor: 19 x 0,28 mmInsulation: Gas inj. PE 3,9 mmouter conductor:  1. Alufoil    0,008-0,03 x 18 mm AL-PET-AL  2 mm overlapping 2. copperbraid coverage 80% 16 x 8 x 0,1 mm; 4,5 mmOutside cover: PVC, 5,4 mm,Velocity factor: 0,81Capacity: 82 ± 2 pF/mScreening till 1 GHz: > 85 dBBending radius (min): 35 mmTemperature:  from -30 --- +80°C / -16° F ---- 176°FResistance inside: 1,5 Ohm / 100 mLoop resistance: 3,2 Ohm / 100 mCopper: 22 kg / kmStrength: 100 N