This rubber sleeve protects plug connections from corrosion and prevents water from entering the installed plug such as BNC, PL and N plugs. For coaxial cables with a diameter of 4.5 to 12 mm. Total length not shortened approx. 14.5 cm.
Do you want to protect your BNC, PL or N connector from the weather outside on the antenna? This can be done quickly and easily with this rubber grommet: simply pull the rubber grommet over the cable before installing the connector, mount the connector and then pull the grommets back up. Now cut off the rubber grommet to match. Finished!
Ideal if you frequently change the antenna or for temporary setup at DX camps, field days etc.
You can order this rubber sleeve with the ready-made cables. The cuff is then fitted to match immediately.
H155 Low-Loss coax cable bulk
The H 155 cable is a doubly shielded low-loss coax cable with foam dielectric and braided center conductor with a 5.4mm diameter. It is extremely flexible with a very low dampening factor and excellent shielding. Due to the small outer diameter similar flexible like RG-58, but with much better shielding and it is really low-loss. Available per meter up to 400 meters.
Technische Data H 155 PVCColour: greyUV: H 155 is UV-resistantImpedance: 50 ± 2 OhmInner conductor: 19 x 0,28 mmInsulation: Gas inj. PE 3,9 mmouter conductor: 1. Alufoil 0,008-0,03 x 18 mm AL-PET-AL 2 mm overlapping 2. copperbraid coverage 80% 16 x 8 x 0,1 mm; 4,5 mmOutside cover: PVC, 5,4 mm,Velocity factor: 0,81Capacity: 82 ± 2 pF/mScreening till 1 GHz: > 85 dBBending radius (min): 35 mmTemperature: from -30 --- +80°C / -16° F ---- 176°FResistance inside: 1,5 Ohm / 100 mLoop resistance: 3,2 Ohm / 100 mCopper: 22 kg / kmStrength: 100 N
PL-Connector UHF-Special/6
This high-quality PL-259 connector is suitable for the coax cable types: RG58U, RG58CU, RG142B/U, RG223U, RG400U, Aircell 5, Airborne 5, H 155, H 2005 und Hyperflex 5. It is equipped as standard with two ground connection sleeves for RG58 and the thicker H 155, Hyperflex 5 etc.
Type: UHF connector special
Design: Connector
Connection: Soldering
Cable inlet Ø6 mm
We use these connectors for the prefabricated H155 and Hyperflex 5 coax cables.
The assembly instructions can be downloaded here or under the "Media" tab.
Messi & Paoloni Hyperflex 5 Low-Loss coax cable
A new breakthrough in the market standards! The new international reference point for attenuations, flexibility and screening efficiency for all 5,4mm/0,212'' cables! Best in its class
Extreme flexibility: perfect matching with rotator operated antennas, obtained by means of a sophisticated full copper stranded inner conductor (19 wires instead of 7).New improved dielectric: outstanding attenuations up to 6 Ghz, even better than some solid core cables of the competition.
Screening efficiency: >105 dB (SA) and improved sturdiness reached by adding 24 more wires to the braid, for a total of 120 wires, (88% coverage+ 100% foil). This leads to a dramatic reduction of the background noise. Moreover the braiders used are 24 spools, instead of 16 spools, giving 50% MORE CROSSOVERS.Lightweight: 4,4 Kg/100 m for a reduced stress of the “hanging and swinging" stretch of the cable in rotor operated antennas.
Excellent Power Handling!
The external PVC jacket is in black UV resistant PVC. Useful hint: the PVC used for the jacket of the cables, makes them extremely flexible but it's not suitable for underground laying. Every cable can be made with PE jacket, on specific request and for reasonable quantities in order to make them buriable.
ATTENUATION at 20°C
FREQUENCY dB/100m dB/100ft1,8 MHz 1,48 0,453,5 MHz 1,91 0,587,0 MHz 2,33 0,7110 MHz 2,63 0,8014 MHz 3,04 0,9321 MHz 3,64 1,1128 MHz 4,16 1,2750 MHz 5,58 1,70100 MHz 8,02 2,44144 MHz 9,66 2,94200 MHz 11,44 3,49400 MHz 16,37 4,99430 MHz 17,0 5,18800 MHz 23,48 7,161000 MHz 26,46 8,071296 MHz 30,5 9,302400 MHz 42,58 12,983000 MHz 48,1 14,664000 MHz 56,95 17,365000 MHz 65,29 19,906000 MHz 72,92 22,23
PL-connector PL7 for Ultraflex 7
This high-quality PL-259 connector is suitable for the coax cable types H 2007, H 2007 FRNC, HIGHFLEXX 7, Aircell 7 and of course Ultraflex 7. It is equipped as standard with a ground connection sleeve.
Type: UHF connector specialDesign: ConnectorConnection: SolderingCable inlet Ø7.3 mm
We use these connectors for the prefabricated Ultraflex 7 coax cables.
The assembly instructions can be downloaded here
€5.40*
This website uses cookies to ensure the best experience possible. More information... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).